Passare al contenuto

Heavy fuels

Vacuum Residue

Vacuum residue is the heaviest material left after vacuum distillation. It is the feed for cokers, visbreakers, bitumen and fuel oil blends.

← Tutti i prodottiDetto anche: Vacuum bottoms, VR, Vacuum tower bottoms, VTB, Short residue

  • Punto di infiammabilitàAbove 200 C typical
  • Densità1000 to 1060 kg/m³
  • ViscositàVery high; over 1,000 mm2/s at 100 C
  • Flusso a freddoOver 30 C (often semi-solid)
  • Zolfo1 to 6%
  • PericoloUsually none, Often not dangerous goods; hot product
Colore tipico, vetro da laboratorio
Campione in vetro da laboratorio di Vacuum Residue, nel suo colore tipico
Un campione di Vacuum Residue in vetro da laboratorio su sfondo scuro da studio, per valutare facilmente il colore.
Scala dei colori
I colori che Vacuum Residue può presentare.

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.

Agitate il liquido per sentire quanto è denso

Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.

Semisolido
Il colore segue il colore tipico di Vacuum Residue.
Fluido e scorrevoleDenso e pesante

Semisolido Semisolido a temperatura normale. Si muove appena e va riscaldato per essere pompato.

Viscosità tipica dai datiVery high; over 1,000 mm2/s at 100 C

Velocità di agitazione
0 px/s
Movimento del liquido
0%
Si calma dopo
-
Superficie
Fermo

La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.

Aspetto

Black, tar-like

Dove si usa

  • Coker feed
  • Visbreaker feed
  • Bitumen feed
  • Fuel oil blend

Manipolazione e sicurezza

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Extremely viscous hot product; burns can occur.

Proprietà tipiche

Aspetto
Black, tar-like
Densità a 15 °C
1000 to 1060 kg/m³
Punto di infiammabilità
Above 200 C typical
Viscosità
Very high; over 1,000 mm2/s at 100 C
Punto di scorrimento
Over 30 C (often semi-solid)
Zolfo tipico
1 to 6%

◉What it is

Vacuum residue is the bottom product of a vacuum distillation unit, boiling above about 500 to 550 C. It is almost solid at room temperature and very rich in asphaltenes, metals and sulphur. Refiners upgrade it in delayed cokers, solvent deasphalters or hydrocrackers, or sell it as fuel oil blendstock or bitumen. Wikipedia describes bitumen as the heavy fraction boiling above about 500 C after vacuum distillation.

⬡What it is made of

C40+ hydrocarbons, asphaltenes, resins, heavy metals.

⚛La chimica

Vacuum residue contains large polycyclic aromatic structures with sulphur, nitrogen and metals (V, Ni). Asphaltenes are insoluble in n-heptane and make the oil stiff.

⚙How it is made

Bottom stream of a vacuum distillation unit operating at 380 to 410 C and under 10 to 40 mmHg.

▶How it works

Heated above 150 C to flow. Upgrading converts it to lighter products.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf refiners process vacuum residue in coking and residue upgrading units. Specific projects are not stated.

Molecole chiave

Norme e specifiche

ASTM D5236Distillation of heavy hydrocarbon mixtures (vacuum potstill)
No standard gradeSold under contract spec

Pericoli

Usually noneClasse Often not dangerous goods; hot product

Extremely viscous hot product; burns can occur.

Come si commercializza

Units

Metric tonnes

Benchmarks

Platts assessments for related fuel oil

Typical cargo

Tanker parcels

Incoterms

FOB, CIF

Notes

Quality varies widely.

Raffinerie che lo producono: i nostri suggerimenti

91 raffinerie censite producono questo prodotto, 21 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.

Vedere tutti i 91 sulla mappa

Terminal che lo movimentano

Lo sapeva?

💡 It can be so thick that it behaves like a solid at room temperature.

💡 Bitumen is the heavy fraction left after vacuum distillation.

Si metta alla prova su Vacuum Residue

Domanda 1 di 3 · Punteggio 0 · Serie 0

Vacuum residue is the bottom product of which unit?

Altro in questo gruppo

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.