Heavy fuels
ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
ULSFO is a residual or blended fuel with sulphur at or below 0.10 percent. It is used in emission control areas in place of distillate fuel.
← Tutti i prodottiDetto anche: ULSFO, 0.1% sulphur fuel oil, ECA fuel oil
- Punto di infiammabilitàMin 60 C
- Densità860 to 950 kg/m³
- Viscosità10 to 180 mm2/s at 50 C typical
- ZolfoMax 0.10% m/m
- PericoloUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.
ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) è solido a temperatura ambiente, quindi non c'è liquido da agitare. 10 to 180 mm2/s at 50 C typical
Aspetto
Dark to black
Dove si usa
- ECA fuel for ships without scrubbers
- Alternative to LSMGO
Manipolazione e sicurezza
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Proprietà tipiche
- Aspetto
- Dark to black
- Densità a 15 °C
- 860 to 950 kg/m³
- Punto di infiammabilità
- Min 60 C
- Viscosità
- 10 to 180 mm2/s at 50 C typical
- Punto di scorrimento
- Varies by blend
- Zolfo tipico
- Max 0.10% m/m
◉What it is
ULSFO is a marine fuel designed to meet the 0.10 percent sulphur cap in ECAs without being a pure distillate. It is made from low sulphur components and is usually cheaper than LSMGO. Because the limit is so low, producing it from residue is challenging. It is not a formal ISO 8217 grade: it usually sits in the DMB or RMD/RME families with 0.10% sulphur. Supply is limited, and many ships simply use LSMGO.
⬡What it is made of
C15 to C50 mixture, mostly paraffinic and hydrotreated.
⚛La chimica
ULSFO is made by blending highly hydrotreated components, so it contains fewer aromatic and sulphur-bearing molecules than other residual fuels. The low sulphur level is the result of hydrodesulphurisation, which converts sulphur in organic molecules to H2S that is removed.
⚙How it is made
Hydrotreated residue, hydrocracker bottoms and distillate are blended; supply depends on the refinery.
▶How it works
Heated as a residual fuel. Low sulphur reduces acid corrosion but also cylinder oil cold corrosion if the engine uses high BN oil.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Gulf demand is limited because there is no Gulf ECA, but ships heading to ECAs can buy low-sulphur fuels at Fujairah. ULSFO availability there is not stated.
Molecole chiave
Norme e specifiche
| MARPOL Annex VI Reg. 14 | 0.10% sulphur limit in ECAs from 1 January 2015 (IMO). |
|---|---|
| ISO 8217 | The applicable grade depends on viscosity; ULSFO is not a separate ISO grade. |
Pericoli
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Come si commercializza
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts ULSFO assessments (Singapore, Rotterdam, Fujairah)
Typical cargo
Barge deliveries
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
Not widely traded; priced between LSMGO and VLSFO.
Raffinerie che lo producono: i nostri suggerimenti
121 raffinerie censite producono questo prodotto, 40 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAccesso all'esportazione
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 5SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAccesso all'esportazione
- 6YASREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
Vedere tutti i 121 sulla mappa
Terminal che lo movimentano
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Lo sapeva?
💡 ULSFO volumes are small compared with VLSFO.
💡 The 0.10 percent ECA limit has applied since 1 January 2015 (IMO).
Si metta alla prova su ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
What sulphur does ULSFO have?
Altro in questo gruppo
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
- Furnace Oil
Fonti
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Port of Fujairah (Wikipedia)
- Fujairah (Wikipedia)
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.






