Heavy fuels
Slurry Oil (Decant Oil)
Slurry oil is the heavy bottom product of an FCC fractionator. After settling out catalyst it is called clarified slurry or decant oil.
← Tutti i prodottiDetto anche: FCC slurry, Clarified slurry oil, CSO, Decant oil, FCC bottoms
- Punto di infiammabilitàAbove 100 C typical
- Densità990 to 1100 kg/m³
- ViscositàVaries; 20 to 200 mm2/s at 100 C
- Flusso a freddoAbove 20 C typical
- Zolfo0.5 to 3%
- Intervallo di ebollizione340 to 600 °C

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Molto denso Molto pesante. Si muove appena e rifluisce lentamente.
Viscosità tipica dai datiVaries; 20 to 200 mm2/s at 100 C
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Black, viscous
Dove si usa
- Carbon black feedstock
- Needle coke feedstock
- Fuel oil blendstock
Manipolazione e sicurezza
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Contains aromatics and may carry carcinogenic polycyclic aromatics.
Proprietà tipiche
- Aspetto
- Black, viscous
- Densità a 15 °C
- 990 to 1100 kg/m³
- Intervallo di ebollizione
- 340 to 600 °C
- Punto di infiammabilità
- Above 100 C typical
- Viscosità
- Varies; 20 to 200 mm2/s at 100 C
- Punto di scorrimento
- Above 20 C typical
- Zolfo tipico
- 0.5 to 3%
◉What it is
Slurry oil is the heavy aromatic liquid left at the base of an FCC main fractionator. It contains catalyst fines, so some is recycled and some is sent to a settler. The clear oil from the top of the settler is decant oil (Wikipedia). It is a feed for carbon black, needle coke and carbon fibre production, and a blendstock for heavy fuel oil.
⬡What it is made of
Highly aromatic C20 to C50 hydrocarbons, polynuclear aromatics.
⚛La chimica
Slurry oil is rich in condensed aromatic rings, which gives high density and a high carbon content. This makes it a good carbon black or needle coke feed.
⚙How it is made
Fractionation at the bottom of an FCC main column; settling removes catalyst fines.
▶How it works
Aromatics burn with a smoky flame but give good carbon yield in carbon black reactors.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Slurry oil is produced wherever refineries run FCC units. Gulf volumes and uses are not stated.
Molecole chiave
Norme e specifiche
| ASTM D4294 | Test method for sulphur by energy-dispersive X-ray fluorescence. |
|---|---|
| Contract specification | Typically density, sulphur, catalyst fines and BMCI. |
Pericoli
Contains aromatics and may carry carcinogenic polycyclic aromatics.
Come si commercializza
Units
Metric tonnes
Benchmarks
Platts FCC slurry oil assessments (USGC), HSFO as reference
Typical cargo
Tanker or barge parcels
Incoterms
FOB, CIF
Notes
Priced against HSFO or carbon black demand.
Raffinerie che lo producono: i nostri suggerimenti
91 raffinerie censite producono questo prodotto, 21 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAccesso all'esportazione
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAccesso all'esportazione
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAccesso all'esportazione
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
Terminal che lo movimentano
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Lo sapeva?
💡 Slurry oil contains residual catalyst fines that can wear pumps.
💡 Decant oil is used as a fuel oil blending stock or carbon black feedstock (Wikipedia).
Si metta alla prova su Slurry Oil (Decant Oil)
What is clarified slurry oil also called?
Altro in questo gruppo
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Cutter Stock
- Furnace Oil
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.






