Passare al contenuto

Heavy fuels

VLSFO 0.5% (Very Low Sulphur Fuel Oil)

VLSFO is marine fuel with sulphur of 0.50 percent or less, created for the IMO 2020 global cap. It is now the main bunker fuel for ocean-going ships.

← Tutti i prodottiDetto anche: VLSFO, 0.5% sulphur fuel oil, IMO 2020 fuel, Compliant fuel

  • Punto di infiammabilitàMin 60 C
  • Densità900 to 991 kg/m³
  • Viscosità30 to 380 mm2/s at 50 C depending on blend
  • Flusso a freddoVaries by blend; many are above 0 C and up to 30 C
  • ZolfoMax 0.50% m/m (typically 0.40 to 0.50%)
  • PericoloUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
Colore tipico, vetro da laboratorio
Campione in vetro da laboratorio di VLSFO 0.5% (Very Low Sulphur Fuel Oil), nel suo colore tipico
Un campione di VLSFO 0.5% (Very Low Sulphur Fuel Oil) in vetro da laboratorio su sfondo scuro da studio, per valutare facilmente il colore.
Fotografia di riferimento
Come VLSFO 0.5% (Very Low Sulphur Fuel Oil) viene stoccato e movimentato nella pratica.

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.

VLSFO 0.5% (Very Low Sulphur Fuel Oil) è solido a temperatura ambiente, quindi non c'è liquido da agitare. 30 to 380 mm2/s at 50 C depending on blend

Aspetto

Dark brown to black, opaque, and viscous like treacle at room temperature. It must be heated to pump. Appearance is not a quality test: a good and a bad VLSFO look the same, which is why laboratory results matter.

Dove si usa

  • Deep-sea vessels without scrubbers
  • Container ships and tankers

Manipolazione e sicurezza

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Proprietà tipiche

Aspetto
Black, may be waxy
Densità a 15 °C
900 to 991 kg/m³
Punto di infiammabilità
Min 60 C
Viscosità
30 to 380 mm2/s at 50 C depending on blend
Punto di scorrimento
Varies by blend; many are above 0 C and up to 30 C
Zolfo tipico
Max 0.50% m/m (typically 0.40 to 0.50%)

◉What it is

VLSFO is a blend of residual and distillate components that meets the 0.50 percent global sulphur limit that took effect on 1 January 2020. Ships without scrubbers must use VLSFO or a more expensive distillate. The composition varies by supplier: some blends are waxy, some are aromatic, and some contain cracked material. That variety makes compatibility checking important. Many VLSFO grades meet ISO 8217 RMG 380 or RME 180 viscosity limits, but the parameters differ from the traditional high-sulphur fuel.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛La chimica

VLSFO blends are made from low-sulphur residues, hydrocracker bottoms and distillates. Paraffinic blends can precipitate wax at low temperature, while aromatic blends have better stability but higher density. Low sulphur means fewer sulphur-containing heteroatoms but not necessarily better stability.

⚙How it is made

Low sulphur residue from refining low sulphur crudes or hydrotreating residues is blended with distillate or cracked streams to meet viscosity and sulphur limits.

▶How it works

Heated as other residual fuels. Some blends need extra heating to avoid wax, and mixing batches can cause sludge. Combustion quality (CCAI or CII) varies.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

VLSFO is a main bunker fuel sold at Fujairah. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

Molecole chiave

Norme e specifiche

ISO 8217Residual grades such as RMG 380 or RME 180; sulphur is set by MARPOL, not by the viscosity grade.
MARPOL Annex VI Reg. 140.50% global sulphur limit from 1 January 2020 (IMO).

Pericoli

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.Classe Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Come si commercializza

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts VLSFO assessments at Fujairah, Singapore, Rotterdam, Houston

Typical cargo

Barge or bunker tanker deliveries of 500 to 5,000 mt

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

VLSFO is quoted per mt; prices track low sulphur residue and gasoil.

Raffinerie che lo producono: i nostri suggerimenti

121 raffinerie censite producono questo prodotto, 40 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.

Vedere tutti i 121 sulla mappa

Terminal che lo movimentano

Lo sapeva?

💡 VLSFO is not a single product: each supplier blends it differently.

💡 The 0.50 percent global limit applied from 1 January 2020 (IMO).

Si metta alla prova su VLSFO 0.5% (Very Low Sulphur Fuel Oil)

Domanda 1 di 3 · Punteggio 0 · Serie 0

What is the VLSFO sulphur limit?

Vedere la pagina delle specifiche PST

Altro in questo gruppo

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.