Heavy fuels
Cutter Stock
Cutter stock is a lighter oil blended into heavy residue to reduce its viscosity. Typical cutters are gasoil, kerosene or light cycle oil.
← All productsAlso called: Cutter, Cutterstock, Cutting oil (fuel oil), Viscosity cutter
- Density800 to 950 kg/m³
- Viscosity1 to 30 mm2/s at 40 C
- Boiling range170 to 400 °C
- HazardDepends on the cutter (for example UN1202 for gasoil), Depends on the cutter; Class 3 if gasoil or kerosene

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Medium Oily. Waves are slower and rounder.
Typical viscosity from the data1 to 30 mm2/s at 40 C
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Clear to dark
Where it is used
- Fuel oil blending
- Bitumen cutback
Handling and safety
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Flammable if gasoil or kerosene.
Typical properties
- Appearance
- Clear to dark
- Density at 15 °C
- 800 to 950 kg/m³
- Boiling range
- 170 to 400 °C
- Viscosity
- 1 to 30 mm2/s at 40 C
- Pour point
- Varies
- Typical sulphur
- Varies
◉What it is
Cutter stock is any lighter petroleum stream used to dilute a heavy oil so it flows and meets a viscosity target. In fuel oil blending, it brings vacuum residue down to 180 or 380 mm2/s. Common cutters are gasoil, light cycle oil, kerosene, visbreaker gasoil and diesel. The cost, sulphur and density of the cutter directly affect the blend. Fuel oil blending is a major business at storage hubs.
⬡What it is made of
C10 to C25 distillate or cracked stock.
⚛The chemistry
Light aromatic and paraffinic hydrocarbons act as solvent for asphaltenes. Too much paraffinic cutter can destabilise asphaltenes.
⚙How it is made
Taken from distillation or cracking units.
▶How it works
Blending uses a viscosity blending index to calculate how much cutter is needed.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Blenders in Fujairah use distillate cutter, typically gasoil or light cycle oil, to make bunker fuel. Specific blending volumes are not stated.
Key molecules
Standards and specifications
| ISO 8217 | The finished blend must meet the marine fuel specification. |
|---|---|
| ASTM D341 | Viscosity-temperature charts for liquid petroleum products. |
Hazards
Flammable if gasoil or kerosene.
How it is traded
Units
Metric tonnes
Benchmarks
Priced from gasoil or LCO
Typical cargo
Barge or tanker
Incoterms
FOB
Notes
Cost tied to gasoil.
Refineries that make it: our suggestions
91 listed refineries make this product, 21 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionExport access
Terminals that handle it
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Did you know
💡 Cutter stock cost can account for a large part of bunker blend price.
💡 Incompatible cutters can create sludge.
Test yourself on Cutter Stock
What does cutter do?
More in this group
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Furnace Oil
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.






