Heavy fuels
Slurry Oil (Decant Oil)
Slurry oil is the heavy bottom product of an FCC fractionator. After settling out catalyst it is called clarified slurry or decant oil.
← All productsAlso called: FCC slurry, Clarified slurry oil, CSO, Decant oil, FCC bottoms
- Flash pointAbove 100 C typical
- Density990 to 1100 kg/m³
- ViscosityVaries; 20 to 200 mm2/s at 100 C
- Cold flowAbove 20 C typical
- Sulphur0.5 to 3%
- Boiling range340 to 600 °C

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Very thick Very heavy. It barely moves and flows back slowly.
Typical viscosity from the dataVaries; 20 to 200 mm2/s at 100 C
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Black, viscous
Where it is used
- Carbon black feedstock
- Needle coke feedstock
- Fuel oil blendstock
Handling and safety
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Contains aromatics and may carry carcinogenic polycyclic aromatics.
Typical properties
- Appearance
- Black, viscous
- Density at 15 °C
- 990 to 1100 kg/m³
- Boiling range
- 340 to 600 °C
- Flash point
- Above 100 C typical
- Viscosity
- Varies; 20 to 200 mm2/s at 100 C
- Pour point
- Above 20 C typical
- Typical sulphur
- 0.5 to 3%
◉What it is
Slurry oil is the heavy aromatic liquid left at the base of an FCC main fractionator. It contains catalyst fines, so some is recycled and some is sent to a settler. The clear oil from the top of the settler is decant oil (Wikipedia). It is a feed for carbon black, needle coke and carbon fibre production, and a blendstock for heavy fuel oil.
⬡What it is made of
Highly aromatic C20 to C50 hydrocarbons, polynuclear aromatics.
⚛The chemistry
Slurry oil is rich in condensed aromatic rings, which gives high density and a high carbon content. This makes it a good carbon black or needle coke feed.
⚙How it is made
Fractionation at the bottom of an FCC main column; settling removes catalyst fines.
▶How it works
Aromatics burn with a smoky flame but give good carbon yield in carbon black reactors.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Slurry oil is produced wherever refineries run FCC units. Gulf volumes and uses are not stated.
Key molecules
Standards and specifications
| ASTM D4294 | Test method for sulphur by energy-dispersive X-ray fluorescence. |
|---|---|
| Contract specification | Typically density, sulphur, catalyst fines and BMCI. |
Hazards
Contains aromatics and may carry carcinogenic polycyclic aromatics.
How it is traded
Units
Metric tonnes
Benchmarks
Platts FCC slurry oil assessments (USGC), HSFO as reference
Typical cargo
Tanker or barge parcels
Incoterms
FOB, CIF
Notes
Priced against HSFO or carbon black demand.
Refineries that make it: our suggestions
91 listed refineries make this product, 21 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionExport access
Terminals that handle it
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Did you know
💡 Slurry oil contains residual catalyst fines that can wear pumps.
💡 Decant oil is used as a fuel oil blending stock or carbon black feedstock (Wikipedia).
Test yourself on Slurry Oil (Decant Oil)
What is clarified slurry oil also called?
More in this group
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Cutter Stock
- Furnace Oil
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.






