Heavy fuels
Furnace Oil
Furnace oil is a heavy residual fuel burned in industrial furnaces and boilers. It is a common name in South Asia for residual fuel oil.
← All productsAlso called: Furnace fuel oil, FO, LSHS, Fuel oil No. 5/6
- Flash pointMin 66 C (IS 1593)
- Density930 to 1010 kg/m³
- ViscosityUp to 370 mm2/s at 50 C in some grades
- Sulphur1.0 to 4.0%
- HazardUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Very thick Very heavy. It barely moves and flows back slowly.
Typical viscosity from the dataUp to 370 mm2/s at 50 C in some grades
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Black, viscous
Where it is used
- Industrial furnaces
- Boilers
- Power plants
Handling and safety
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Typical properties
- Appearance
- Black, viscous
- Density at 15 °C
- 930 to 1010 kg/m³
- Flash point
- Min 66 C (IS 1593)
- Viscosity
- Up to 370 mm2/s at 50 C in some grades
- Pour point
- Varies by grade and season
- Typical sulphur
- 1.0 to 4.0%
◉What it is
Furnace oil is another name for residual fuel oil used in industrial heating. In Wikipedia's fuel oil article, furnace fuel oil is listed as an alias for heavier grades such as No. 5 and No. 6. It must be preheated to 90 to 110 C before atomisation. Indian specification IS 1593 defines grades such as FO and LSHS (low sulphur heavy stock). Users include steel plants, textile mills and power stations.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛The chemistry
Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.
⚙How it is made
Blended residual and cutter.
▶How it works
Preheated, atomised and burned in industrial burners.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Gulf residual fuel supplies South Asia and Africa. Central Asia may buy mazut-type fuel. Volumes are not stated.
Key molecules
Standards and specifications
| IS 1593 | Indian furnace oil standard |
|---|---|
| ASTM D396 No. 6 | US counterpart |
Hazards
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
How it is traded
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts Singapore and Arab Gulf fuel oil assessments
Typical cargo
Tanker parcels
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
Used in South Asia.
Refineries that make it: our suggestions
91 listed refineries make this product, 21 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionExport access
Terminals that handle it
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Did you know
💡 Furnace oil is sometimes called mazut in Russia.
💡 Furnace oil must be preheated before atomisation.
Test yourself on Furnace Oil
Furnace oil is a type of?
More in this group
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.






