Skip to content

Heavy fuels

HSFO 3.5% (High Sulphur Fuel Oil)

HSFO is residual marine fuel with up to 3.5 percent sulphur. After IMO 2020 it can be burned only by ships fitted with exhaust gas scrubbers.

← All productsAlso called: HSFO, High sulphur fuel oil, 3.5% sulphur fuel oil, RMG 380 3.5%

  • Flash pointMin 60 C
  • Density960 to 991 kg/m³
  • ViscosityUp to 380 mm2/s at 50 C (RMG 380)
  • Cold flowMax 30 C (ISO 8217 RMG)
  • SulphurUp to 3.50% m/m (typically 2.5 to 3.5%)
  • HazardUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
Typical colour, laboratory glass
Laboratory glass sample of HSFO 3.5% (High Sulphur Fuel Oil), in its typical colour
A sample of HSFO 3.5% (High Sulphur Fuel Oil) in laboratory glass on a dark studio background, so the colour is easy to judge.
Reference photograph
How HSFO 3.5% (High Sulphur Fuel Oil) is stored and moved in practice.

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo.

HSFO 3.5% (High Sulphur Fuel Oil) is a solid at normal temperature, so there is no liquid to stir. Up to 380 mm2/s at 50 C (RMG 380)

How it looks

Black, opaque and very viscous. It must be heated to flow. As with all residual fuels, colour says nothing about quality.

Where it is used

  • Ships with scrubbers
  • Power plants and some industry

Handling and safety

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Typical properties

Appearance
Black, opaque, viscous
Density at 15 °C
960 to 991 kg/m³
Flash point
Min 60 C
Viscosity
Up to 380 mm2/s at 50 C (RMG 380)
Pour point
Max 30 C (ISO 8217 RMG)
Typical sulphur
Up to 3.50% m/m (typically 2.5 to 3.5%)

◉What it is

HSFO was the main ship fuel before 2020, when the global limit for sulphur in marine fuel was 3.50 percent. The IMO cut the global cap to 0.50 percent from 1 January 2020, and carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO). Today HSFO is sold to scrubber-fitted vessels and to some land users such as power plants. It is a thick residual oil of RMG 380 grade or similar, and is cheaper than low sulphur fuel. Its market share fell sharply after 2020 but recovered in some ports as scrubber numbers grew.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛The chemistry

Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.

⚙How it is made

The bottom product of vacuum distillation or visbreaking is blended with cutter stock (distillate) to reach the target viscosity. No desulphurisation of the residue is done in most cases.

▶How it works

Residual fuel must be heated to about 130 to 150 C to be injected into a marine diesel engine, with viscosity around 10 to 15 mm2/s at the injectors. Sulphur oxides in exhaust are removed by a scrubber that sprays water or caustic.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Fujairah sells HSFO to ships fitted with scrubbers, and Gulf refineries produce high-sulphur residue that can be sold as HSFO. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

Key molecules

Standards and specifications

ISO 8217Residual grades such as RMG 380: viscosity 380 mm2/s max at 50 C, flash point 60 C min.
MARPOL Annex VI Reg. 143.50% global limit until 2019 and 0.50% from 1 January 2020 (IMO); fuel above 0.50% may be burned only with an approved exhaust gas cleaning system.
IMO exhaust gas cleaning system guidelines (MEPC.259(68))Guidelines for scrubbers on ships.

Hazards

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.Class Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

How it is traded

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts HSFO 380 assessments at Fujairah, Singapore, Rotterdam

Typical cargo

Barge deliveries; tanker loads up to 80,000 mt

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

HSFO usually trades at a discount to VLSFO; the spread drives scrubber economics.

Refineries that make it: our suggestions

121 listed refineries make this product, 40 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.

See all 121 on the map

Terminals that handle it

Did you know

💡 Before 2020 the global limit was 3.50 percent sulphur.

💡 Carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO).

Test yourself on HSFO 3.5% (High Sulphur Fuel Oil)

Question 1 of 3 · Score 0 · Streak 0

What was the pre-2020 global marine sulphur limit?

See the PST specification page

More in this group

Sources

Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.