Heavy fuels
Furnace Oil
Furnace oil is a heavy residual fuel burned in industrial furnaces and boilers. It is a common name in South Asia for residual fuel oil.
← Todos los productosTambién llamado: Furnace fuel oil, FO, LSHS, Fuel oil No. 5/6
- Punto de inflamaciónMin 66 C (IS 1593)
- Densidad930 to 1010 kg/m³
- ViscosidadUp to 370 mm2/s at 50 C in some grades
- Azufre1.0 to 4.0%
- PeligroUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


Créditos de las imágenes Las muestras en vidrio de laboratorio se elaboran a partir de fotos de referencia de Wikimedia Commons de Chemik10 (CC BY-SA 2.5) y una foto de muestra de petróleo CC0.
Agite el líquido para sentir su espesor
Mueva el ratón o un dedo sobre el líquido. Mantenga pulsado y arrastre para agitar con más fuerza. Teclado: las flechas agitan, la barra espaciadora sacude.
Muy espeso Muy pesado. Casi no se mueve y vuelve a su sitio despacio.
Viscosidad típica según los datosUp to 370 mm2/s at 50 C in some grades
- Velocidad de agitación
- 0 px/s
- Movimiento del líquido
- 0%
- Se calma tras
- -
- Superficie
- Quieto
La clase es solo una guía de sensación. La viscosidad indicada es la de los datos de la especificación.
Aspecto
Black, viscous
Dónde se utiliza
- Industrial furnaces
- Boilers
- Power plants
Manipulación y seguridad
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Propiedades típicas
- Aspecto
- Black, viscous
- Densidad a 15 °C
- 930 to 1010 kg/m³
- Punto de inflamación
- Min 66 C (IS 1593)
- Viscosidad
- Up to 370 mm2/s at 50 C in some grades
- Punto de fluidez
- Varies by grade and season
- Azufre típico
- 1.0 to 4.0%
◉What it is
Furnace oil is another name for residual fuel oil used in industrial heating. In Wikipedia's fuel oil article, furnace fuel oil is listed as an alias for heavier grades such as No. 5 and No. 6. It must be preheated to 90 to 110 C before atomisation. Indian specification IS 1593 defines grades such as FO and LSHS (low sulphur heavy stock). Users include steel plants, textile mills and power stations.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛La química
Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.
⚙How it is made
Blended residual and cutter.
▶How it works
Preheated, atomised and burned in industrial burners.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Gulf residual fuel supplies South Asia and Africa. Central Asia may buy mazut-type fuel. Volumes are not stated.
Moléculas clave
Normas y especificaciones
| IS 1593 | Indian furnace oil standard |
|---|---|
| ASTM D396 No. 6 | US counterpart |
Peligros
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Cómo se comercializa
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts Singapore and Arab Gulf fuel oil assessments
Typical cargo
Tanker parcels
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
Used in South Asia.
Refinerías que lo producen: nuestras sugerencias
91 refinerías de la lista producen este producto, 21 de ellas en el Golfo, Irán e Irak. Ordenamos primero las plantas del Golfo, después las que están en operación y luego por capacidad.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcceso de exportación
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcceso de exportación
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcceso de exportación
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcceso de exportación
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcceso de exportación
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionAcceso de exportación
Terminales que lo manipulan
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
¿Sabía que…?
💡 Furnace oil is sometimes called mazut in Russia.
💡 Furnace oil must be preheated before atomisation.
Póngase a prueba sobre Furnace Oil
Furnace oil is a type of?
Más de este grupo
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
Fuentes
Redactado con palabras propias de PST a partir de las fuentes anteriores. Fiabilidad de los datos: medium. Los valores típicos varían según el origen y el contrato, por lo que debe leer siempre la especificación de su propio contrato.






