Heavy fuels
VLSFO 0.5% (Very Low Sulphur Fuel Oil)
VLSFO is marine fuel with sulphur of 0.50 percent or less, created for the IMO 2020 global cap. It is now the main bunker fuel for ocean-going ships.
← Todos los productosTambién llamado: VLSFO, 0.5% sulphur fuel oil, IMO 2020 fuel, Compliant fuel
- Punto de inflamaciónMin 60 C
- Densidad900 to 991 kg/m³
- Viscosidad30 to 380 mm2/s at 50 C depending on blend
- Flujo en fríoVaries by blend; many are above 0 C and up to 30 C
- AzufreMax 0.50% m/m (typically 0.40 to 0.50%)
- PeligroUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


Créditos de las imágenes Las muestras en vidrio de laboratorio se elaboran a partir de fotos de referencia de Wikimedia Commons de Chemik10 (CC BY-SA 2.5) y una foto de muestra de petróleo CC0.
VLSFO 0.5% (Very Low Sulphur Fuel Oil) es un sólido a temperatura normal, por lo que no hay líquido que agitar. 30 to 380 mm2/s at 50 C depending on blend
Aspecto
Dark brown to black, opaque, and viscous like treacle at room temperature. It must be heated to pump. Appearance is not a quality test: a good and a bad VLSFO look the same, which is why laboratory results matter.
Dónde se utiliza
- Deep-sea vessels without scrubbers
- Container ships and tankers
Manipulación y seguridad
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Propiedades típicas
- Aspecto
- Black, may be waxy
- Densidad a 15 °C
- 900 to 991 kg/m³
- Punto de inflamación
- Min 60 C
- Viscosidad
- 30 to 380 mm2/s at 50 C depending on blend
- Punto de fluidez
- Varies by blend; many are above 0 C and up to 30 C
- Azufre típico
- Max 0.50% m/m (typically 0.40 to 0.50%)
◉What it is
VLSFO is a blend of residual and distillate components that meets the 0.50 percent global sulphur limit that took effect on 1 January 2020. Ships without scrubbers must use VLSFO or a more expensive distillate. The composition varies by supplier: some blends are waxy, some are aromatic, and some contain cracked material. That variety makes compatibility checking important. Many VLSFO grades meet ISO 8217 RMG 380 or RME 180 viscosity limits, but the parameters differ from the traditional high-sulphur fuel.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛La química
VLSFO blends are made from low-sulphur residues, hydrocracker bottoms and distillates. Paraffinic blends can precipitate wax at low temperature, while aromatic blends have better stability but higher density. Low sulphur means fewer sulphur-containing heteroatoms but not necessarily better stability.
⚙How it is made
Low sulphur residue from refining low sulphur crudes or hydrotreating residues is blended with distillate or cracked streams to meet viscosity and sulphur limits.
▶How it works
Heated as other residual fuels. Some blends need extra heating to avoid wax, and mixing batches can cause sludge. Combustion quality (CCAI or CII) varies.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
VLSFO is a main bunker fuel sold at Fujairah. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.
Moléculas clave
Normas y especificaciones
| ISO 8217 | Residual grades such as RMG 380 or RME 180; sulphur is set by MARPOL, not by the viscosity grade. |
|---|---|
| MARPOL Annex VI Reg. 14 | 0.50% global sulphur limit from 1 January 2020 (IMO). |
Peligros
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Cómo se comercializa
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts VLSFO assessments at Fujairah, Singapore, Rotterdam, Houston
Typical cargo
Barge or bunker tanker deliveries of 500 to 5,000 mt
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
VLSFO is quoted per mt; prices track low sulphur residue and gasoil.
Refinerías que lo producen: nuestras sugerencias
121 refinerías de la lista producen este producto, 40 de ellas en el Golfo, Irán e Irak. Ordenamos primero las plantas del Golfo, después las que están en operación y luego por capacidad.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcceso de exportación
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcceso de exportación
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcceso de exportación
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAcceso de exportación
- 5SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcceso de exportación
- 6YASREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingDeep conversionAcceso de exportación
Terminales que lo manipulan
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
¿Sabía que…?
💡 VLSFO is not a single product: each supplier blends it differently.
💡 The 0.50 percent global limit applied from 1 January 2020 (IMO).
Póngase a prueba sobre VLSFO 0.5% (Very Low Sulphur Fuel Oil)
What is the VLSFO sulphur limit?
Ver la página de especificaciones de PST
Más de este grupo
- HSFO 3.5% (High Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
- Furnace Oil
Fuentes
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Port of Fujairah (Wikipedia)
- Fujairah (Wikipedia)
Redactado con palabras propias de PST a partir de las fuentes anteriores. Fiabilidad de los datos: medium. Los valores típicos varían según el origen y el contrato, por lo que debe leer siempre la especificación de su propio contrato.






