Saltar al contenido

Heavy fuels

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)

ULSFO is a residual or blended fuel with sulphur at or below 0.10 percent. It is used in emission control areas in place of distillate fuel.

← Todos los productosTambién llamado: ULSFO, 0.1% sulphur fuel oil, ECA fuel oil

  • Punto de inflamaciónMin 60 C
  • Densidad860 to 950 kg/m³
  • Viscosidad10 to 180 mm2/s at 50 C typical
  • AzufreMax 0.10% m/m
  • PeligroUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
Color típico, vidrio de laboratorio
Muestra de ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) en un vaso de laboratorio, con su color típico
Una muestra de ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) en vidrio de laboratorio sobre un fondo oscuro de estudio, para apreciar bien el color.
Fotografía de referencia
Cómo se almacena y se mueve ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) en la práctica.

Créditos de las imágenes Las muestras en vidrio de laboratorio se elaboran a partir de fotos de referencia de Wikimedia Commons de Chemik10 (CC BY-SA 2.5) y una foto de muestra de petróleo CC0.

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) es un sólido a temperatura normal, por lo que no hay líquido que agitar. 10 to 180 mm2/s at 50 C typical

Aspecto

Dark to black

Dónde se utiliza

  • ECA fuel for ships without scrubbers
  • Alternative to LSMGO

Manipulación y seguridad

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Propiedades típicas

Aspecto
Dark to black
Densidad a 15 °C
860 to 950 kg/m³
Punto de inflamación
Min 60 C
Viscosidad
10 to 180 mm2/s at 50 C typical
Punto de fluidez
Varies by blend
Azufre típico
Max 0.10% m/m

◉What it is

ULSFO is a marine fuel designed to meet the 0.10 percent sulphur cap in ECAs without being a pure distillate. It is made from low sulphur components and is usually cheaper than LSMGO. Because the limit is so low, producing it from residue is challenging. It is not a formal ISO 8217 grade: it usually sits in the DMB or RMD/RME families with 0.10% sulphur. Supply is limited, and many ships simply use LSMGO.

⬡What it is made of

C15 to C50 mixture, mostly paraffinic and hydrotreated.

⚛La química

ULSFO is made by blending highly hydrotreated components, so it contains fewer aromatic and sulphur-bearing molecules than other residual fuels. The low sulphur level is the result of hydrodesulphurisation, which converts sulphur in organic molecules to H2S that is removed.

⚙How it is made

Hydrotreated residue, hydrocracker bottoms and distillate are blended; supply depends on the refinery.

▶How it works

Heated as a residual fuel. Low sulphur reduces acid corrosion but also cylinder oil cold corrosion if the engine uses high BN oil.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf demand is limited because there is no Gulf ECA, but ships heading to ECAs can buy low-sulphur fuels at Fujairah. ULSFO availability there is not stated.

Moléculas clave

Normas y especificaciones

MARPOL Annex VI Reg. 140.10% sulphur limit in ECAs from 1 January 2015 (IMO).
ISO 8217The applicable grade depends on viscosity; ULSFO is not a separate ISO grade.

Peligros

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.Clase Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Cómo se comercializa

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts ULSFO assessments (Singapore, Rotterdam, Fujairah)

Typical cargo

Barge deliveries

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

Not widely traded; priced between LSMGO and VLSFO.

Refinerías que lo producen: nuestras sugerencias

121 refinerías de la lista producen este producto, 40 de ellas en el Golfo, Irán e Irak. Ordenamos primero las plantas del Golfo, después las que están en operación y luego por capacidad.

Ver los 121 en el mapa

Terminales que lo manipulan

¿Sabía que…?

💡 ULSFO volumes are small compared with VLSFO.

💡 The 0.10 percent ECA limit has applied since 1 January 2015 (IMO).

Póngase a prueba sobre ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)

Pregunta 1 de 3 · Puntuación 0 · Racha 0

What sulphur does ULSFO have?

Más de este grupo

Fuentes

Redactado con palabras propias de PST a partir de las fuentes anteriores. Fiabilidad de los datos: medium. Los valores típicos varían según el origen y el contrato, por lo que debe leer siempre la especificación de su propio contrato.