Saltar al contenido

Heavy fuels

IFO 380 and IFO 180

IFO 380 and IFO 180 are intermediate fuel oils named for their maximum viscosity in mm2/s at 50 C. They are blends of residual oil with some distillate.

← Todos los productosTambién llamado: Intermediate Fuel Oil 380, Intermediate Fuel Oil 180, RMG 380, RME 180, IFO

  • Punto de inflamaciónMin 60 C
  • Densidad960 to 991 kg/m³
  • ViscosidadMax 180 or 380 mm2/s at 50 C
  • Flujo en fríoMax 30 C
  • AzufreDepends on type: HS up to 3.5%; VLS up to 0.50%
  • PeligroUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
Color típico, vidrio de laboratorio
Muestra de IFO 380 and IFO 180 en un vaso de laboratorio, con su color típico
Una muestra de IFO 380 and IFO 180 en vidrio de laboratorio sobre un fondo oscuro de estudio, para apreciar bien el color.
Fotografía de referencia
Cómo se almacena y se mueve IFO 380 and IFO 180 en la práctica.

Créditos de las imágenes Las muestras en vidrio de laboratorio se elaboran a partir de fotos de referencia de Wikimedia Commons de Chemik10 (CC BY-SA 2.5) y una foto de muestra de petróleo CC0.

Agite el líquido para sentir su espesor

Mueva el ratón o un dedo sobre el líquido. Mantenga pulsado y arrastre para agitar con más fuerza. Teclado: las flechas agitan, la barra espaciadora sacude.

Muy espeso
El color corresponde al color típico de IFO 380 and IFO 180.
Fino y sueltoEspeso y pesado

Muy espeso Muy pesado. Casi no se mueve y vuelve a su sitio despacio.

Viscosidad típica según los datosMax 180 or 380 mm2/s at 50 C

Velocidad de agitación
0 px/s
Movimiento del líquido
0%
Se calma tras
-
Superficie
Quieto

La clase es solo una guía de sensación. La viscosidad indicada es la de los datos de la especificación.

Aspecto

Black, viscous

Dónde se utiliza

  • Ships with slow and medium speed diesel engines
  • Power stations

Manipulación y seguridad

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Propiedades típicas

Aspecto
Black, viscous
Densidad a 15 °C
960 to 991 kg/m³
Punto de inflamación
Min 60 C
Viscosidad
Max 180 or 380 mm2/s at 50 C
Punto de fluidez
Max 30 C
Azufre típico
Depends on type: HS up to 3.5%; VLS up to 0.50%

◉What it is

Intermediate fuel oil is a marine residual fuel blend. The numbers refer to viscosity in centistokes at 50 C: 380 or 180. According to Wikipedia, IFO 380 is about 98 percent residual oil with 2 percent distillate, while IFO 180 is about 88 percent residual and 12 percent distillate. In ISO 8217 terms IFO 380 corresponds to RMG 380 and IFO 180 to RME 180. They were the main ship fuels before IMO 2020 and are still sold in high and low sulphur forms.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛La química

Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.

⚙How it is made

Vacuum residue or visbreaker residue is diluted with cutter stock or light cycle oil to reach 180 or 380 viscosity.

▶How it works

The fuel is heated to about 130 C or more for injection. The 380 grade is usually cheaper per tonne than 180 because it needs less of the more expensive distillate cutter to reach its viscosity.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

IFO 380 in high-sulphur and 0.50 percent forms is sold at Fujairah. Gulf refineries produce the residual component. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

Moléculas clave

Normas y especificaciones

ISO 8217RME 180 and RMG 380 grades: density 991 kg/m3 max, viscosity 180 or 380 mm2/s max at 50 C, flash point 60 C min.
MARPOL Annex VISulphur limits.

Peligros

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.Clase Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Cómo se comercializa

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts 380 CST HSFO and 180 CST assessments

Typical cargo

Bunker barge or tanker

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

380 is the global benchmark viscosity.

Refinerías que lo producen: nuestras sugerencias

91 refinerías de la lista producen este producto, 21 de ellas en el Golfo, Irán e Irak. Ordenamos primero las plantas del Golfo, después las que están en operación y luego por capacidad.

Ver los 91 en el mapa

Terminales que lo manipulan

¿Sabía que…?

💡 The numbers are viscosity in mm2/s at 50 C, not density.

💡 The 50 C test temperature is used because heavy fuel is too thick to measure conveniently at 40 C.

Póngase a prueba sobre IFO 380 and IFO 180

Pregunta 1 de 3 · Puntuación 0 · Racha 0

What does 380 mean in IFO 380?

Más de este grupo

Fuentes

Redactado con palabras propias de PST a partir de las fuentes anteriores. Fiabilidad de los datos: medium. Los valores típicos varían según el origen y el contrato, por lo que debe leer siempre la especificación de su propio contrato.