Heavy fuels
Residual Fuel Oil (RFO / MFO)
Residual fuel oil is what remains after lighter products are distilled from crude. It is thick, dense and sulphur-rich, and it is burned in ships, boilers and power plants.
← Todos los productosTambién llamado: Mazut, MFO, Marine fuel oil, Fuel oil No. 6, Bunker C, Black oil
- Punto de inflamaciónMin 60 C typical (Wikipedia: about 65 C for No. 6)
- Densidad950 to 1030 kg/m³
- Viscosidad50 to 700 mm2/s at 50 C
- Flujo en fríoUp to 30 C
- Azufre0.5 to 4% typical
- PeligroUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


Créditos de las imágenes Las muestras en vidrio de laboratorio se elaboran a partir de fotos de referencia de Wikimedia Commons de Chemik10 (CC BY-SA 2.5) y una foto de muestra de petróleo CC0.
Agite el líquido para sentir su espesor
Mueva el ratón o un dedo sobre el líquido. Mantenga pulsado y arrastre para agitar con más fuerza. Teclado: las flechas agitan, la barra espaciadora sacude.
Muy espeso Muy pesado. Casi no se mueve y vuelve a su sitio despacio.
Viscosidad típica según los datos50 to 700 mm2/s at 50 C
- Velocidad de agitación
- 0 px/s
- Movimiento del líquido
- 0%
- Se calma tras
- -
- Superficie
- Quieto
La clase es solo una guía de sensación. La viscosidad indicada es la de los datos de la especificación.
Aspecto
Black, tarry
Dónde se utiliza
- Ship fuel
- Power plant fuel
- Industrial boilers
- Cement kilns
Manipulación y seguridad
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Propiedades típicas
- Aspecto
- Black, tarry
- Densidad a 15 °C
- 950 to 1030 kg/m³
- Punto de inflamación
- Min 60 C typical (Wikipedia: about 65 C for No. 6)
- Viscosidad
- 50 to 700 mm2/s at 50 C
- Punto de fluidez
- Up to 30 C
- Azufre típico
- 0.5 to 4% typical
◉What it is
Residual fuel oil is the heaviest liquid product of a refinery. It is the vacuum residue or atmospheric residue, usually blended with a lighter cutter stock to adjust viscosity. In the US it is fuel oil No. 6 or Bunker C; in Russia and Central Asia it is called mazut; in power industries it may be called MFO (marine fuel oil or mazut fuel oil). Density is about 0.95 to 1.03 g/cm3 (Wikipedia). It must be heated to flow: No. 6 needs preheating to about 104 to 127 C (Wikipedia). The fuel is cheap but polluting.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛La química
Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.
⚙How it is made
Vacuum distillation leaves vacuum residue, which can be visbroken to cut viscosity. The result is diluted with distillates.
▶How it works
Heated, filtered and atomised to burn in boilers and slow engines.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Gulf refineries produce fuel oil and Fujairah stores and blends it. Central Asia uses mazut for power and heating. Volumes are not stated.
Moléculas clave
Normas y especificaciones
| ISO 8217 | Marine residual grades |
|---|---|
| ASTM D396 | US fuel oil grades including No. 5 and No. 6 |
| GOST 10585 | Russian mazut specification |
Peligros
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Cómo se comercializa
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.4 to 6.6 bbl per mt.
Benchmarks
Platts FOB Arab Gulf HSFO 380 and fuel oil 180 assessments
Typical cargo
Tanker parcels 20,000 to 80,000 mt
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
Often sold by cargo, with large volumes from Gulf refineries.
Refinerías que lo producen: nuestras sugerencias
91 refinerías de la lista producen este producto, 21 de ellas en el Golfo, Irán e Irak. Ordenamos primero las plantas del Golfo, después las que están en operación y luego por capacidad.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcceso de exportación
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcceso de exportación
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcceso de exportación
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcceso de exportación
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcceso de exportación
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionAcceso de exportación
Terminales que lo manipulan
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
¿Sabía que…?
💡 No. 6 oil is also called Bunker C and needs preheating to about 104 to 127 C (Wikipedia).
💡 Residual fuel oil often has a density close to that of water, from about 0.95 to 1.03 g/cm3.
Póngase a prueba sobre Residual Fuel Oil (RFO / MFO)
What is mazut?
Más de este grupo
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
- Furnace Oil
Fuentes
Redactado con palabras propias de PST a partir de las fuentes anteriores. Fiabilidad de los datos: medium. Los valores típicos varían según el origen y el contrato, por lo que debe leer siempre la especificación de su propio contrato.






