Heavy fuels
Cutter Stock
Cutter stock is a lighter oil blended into heavy residue to reduce its viscosity. Typical cutters are gasoil, kerosene or light cycle oil.
← सभी उत्पादअन्य नाम: Cutter, Cutterstock, Cutting oil (fuel oil), Viscosity cutter
- घनत्व800 to 950 kg/m³
- विस्कॉसिटी1 to 30 mm2/s at 40 C
- क्वथनांक सीमा170 to 400 °C
- खतराDepends on the cutter (for example UN1202 for gasoil), Depends on the cutter; Class 3 if gasoil or kerosene

चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.
तरल को हिलाकर उसका गाढ़ापन महसूस करें
माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।
मध्यम तैलीय। लहरें धीमी और गोल होती हैं।
डेटा से सामान्य श्यानता1 to 30 mm2/s at 40 C
- हिलाने की गति
- 0 px/s
- तरल की गति
- 0%
- शांत होने में लगा समय
- -
- सतह
- स्थिर
यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।
यह कैसा दिखता है
Clear to dark
इसका उपयोग कहाँ होता है
- Fuel oil blending
- Bitumen cutback
हैंडलिंग और सुरक्षा
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Flammable if gasoil or kerosene.
सामान्य गुण
- रूप-रंग
- Clear to dark
- 15 °C पर डेंसिटी
- 800 to 950 kg/m³
- क्वथनांक सीमा
- 170 to 400 °C
- विस्कॉसिटी
- 1 to 30 mm2/s at 40 C
- पोर पॉइंट
- Varies
- सामान्य सल्फ़र
- Varies
◉What it is
Cutter stock is any lighter petroleum stream used to dilute a heavy oil so it flows and meets a viscosity target. In fuel oil blending, it brings vacuum residue down to 180 or 380 mm2/s. Common cutters are gasoil, light cycle oil, kerosene, visbreaker gasoil and diesel. The cost, sulphur and density of the cutter directly affect the blend. Fuel oil blending is a major business at storage hubs.
⬡What it is made of
C10 to C25 distillate or cracked stock.
⚛रसायन विज्ञान
Light aromatic and paraffinic hydrocarbons act as solvent for asphaltenes. Too much paraffinic cutter can destabilise asphaltenes.
⚙How it is made
Taken from distillation or cracking units.
▶How it works
Blending uses a viscosity blending index to calculate how much cutter is needed.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Blenders in Fujairah use distillate cutter, typically gasoil or light cycle oil, to make bunker fuel. Specific blending volumes are not stated.
मुख्य अणु
मानक और स्पेसिफिकेशन
| ISO 8217 | The finished blend must meet the marine fuel specification. |
|---|---|
| ASTM D341 | Viscosity-temperature charts for liquid petroleum products. |
ख़तरे
Flammable if gasoil or kerosene.
इसका व्यापार कैसे होता है
Units
Metric tonnes
Benchmarks
Priced from gasoil or LCO
Typical cargo
Barge or tanker
Incoterms
FOB
Notes
Cost tied to gasoil.
इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव
91 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 21 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
इसे संभालने वाले टर्मिनल
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
क्या आप जानते हैं
💡 Cutter stock cost can account for a large part of bunker blend price.
💡 Incompatible cutters can create sludge.
Cutter Stock पर ख़ुद को परखें
What does cutter do?
इस समूह में और
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Furnace Oil
स्रोत
ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।






