सामग्री पर जाएँ

Heavy fuels

HSFO 3.5% (High Sulphur Fuel Oil)

HSFO is residual marine fuel with up to 3.5 percent sulphur. After IMO 2020 it can be burned only by ships fitted with exhaust gas scrubbers.

← सभी उत्पादअन्य नाम: HSFO, High sulphur fuel oil, 3.5% sulphur fuel oil, RMG 380 3.5%

  • फ़्लैश पॉइंटMin 60 C
  • घनत्व960 to 991 kg/m³
  • विस्कॉसिटीUp to 380 mm2/s at 50 C (RMG 380)
  • ठंड में प्रवाहMax 30 C (ISO 8217 RMG)
  • सल्फरUp to 3.50% m/m (typically 2.5 to 3.5%)
  • खतराUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
सामान्य रंग, प्रयोगशाला काँच
HSFO 3.5% (High Sulphur Fuel Oil) का प्रयोगशाला काँच नमूना, उसके सामान्य रंग में
गहरे स्टूडियो बैकग्राउंड पर प्रयोगशाला के काँच में HSFO 3.5% (High Sulphur Fuel Oil) का नमूना, ताकि रंग आसानी से परखा जा सके।
संदर्भ तस्वीर
व्यवहार में HSFO 3.5% (High Sulphur Fuel Oil) का भंडारण और परिवहन कैसे होता है।

चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.

HSFO 3.5% (High Sulphur Fuel Oil) सामान्य तापमान पर ठोस है, इसलिए हिलाने के लिए कोई तरल नहीं है। Up to 380 mm2/s at 50 C (RMG 380)

यह कैसा दिखता है

Black, opaque and very viscous. It must be heated to flow. As with all residual fuels, colour says nothing about quality.

इसका उपयोग कहाँ होता है

  • Ships with scrubbers
  • Power plants and some industry

हैंडलिंग और सुरक्षा

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

सामान्य गुण

रूप-रंग
Black, opaque, viscous
15 °C पर डेंसिटी
960 to 991 kg/m³
फ़्लैश पॉइंट
Min 60 C
विस्कॉसिटी
Up to 380 mm2/s at 50 C (RMG 380)
पोर पॉइंट
Max 30 C (ISO 8217 RMG)
सामान्य सल्फ़र
Up to 3.50% m/m (typically 2.5 to 3.5%)

◉What it is

HSFO was the main ship fuel before 2020, when the global limit for sulphur in marine fuel was 3.50 percent. The IMO cut the global cap to 0.50 percent from 1 January 2020, and carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO). Today HSFO is sold to scrubber-fitted vessels and to some land users such as power plants. It is a thick residual oil of RMG 380 grade or similar, and is cheaper than low sulphur fuel. Its market share fell sharply after 2020 but recovered in some ports as scrubber numbers grew.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛रसायन विज्ञान

Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.

⚙How it is made

The bottom product of vacuum distillation or visbreaking is blended with cutter stock (distillate) to reach the target viscosity. No desulphurisation of the residue is done in most cases.

▶How it works

Residual fuel must be heated to about 130 to 150 C to be injected into a marine diesel engine, with viscosity around 10 to 15 mm2/s at the injectors. Sulphur oxides in exhaust are removed by a scrubber that sprays water or caustic.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Fujairah sells HSFO to ships fitted with scrubbers, and Gulf refineries produce high-sulphur residue that can be sold as HSFO. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

मुख्य अणु

मानक और स्पेसिफिकेशन

ISO 8217Residual grades such as RMG 380: viscosity 380 mm2/s max at 50 C, flash point 60 C min.
MARPOL Annex VI Reg. 143.50% global limit until 2019 and 0.50% from 1 January 2020 (IMO); fuel above 0.50% may be burned only with an approved exhaust gas cleaning system.
IMO exhaust gas cleaning system guidelines (MEPC.259(68))Guidelines for scrubbers on ships.

ख़तरे

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.क्लास Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

इसका व्यापार कैसे होता है

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts HSFO 380 assessments at Fujairah, Singapore, Rotterdam

Typical cargo

Barge deliveries; tanker loads up to 80,000 mt

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

HSFO usually trades at a discount to VLSFO; the spread drives scrubber economics.

इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव

121 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 40 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।

नक़्शे पर सभी 121 देखें

इसे संभालने वाले टर्मिनल

क्या आप जानते हैं

💡 Before 2020 the global limit was 3.50 percent sulphur.

💡 Carriage of non-compliant fuel was banned from 1 March 2020 unless the ship has a scrubber (IMO).

HSFO 3.5% (High Sulphur Fuel Oil) पर ख़ुद को परखें

सवाल 1/3 · स्कोर 0 · लकीर 0

What was the pre-2020 global marine sulphur limit?

PST स्पेसिफिकेशन पेज देखें

इस समूह में और

स्रोत

ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।