सामग्री पर जाएँ

Heavy fuels

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)

ULSFO is a residual or blended fuel with sulphur at or below 0.10 percent. It is used in emission control areas in place of distillate fuel.

← सभी उत्पादअन्य नाम: ULSFO, 0.1% sulphur fuel oil, ECA fuel oil

  • फ़्लैश पॉइंटMin 60 C
  • घनत्व860 to 950 kg/m³
  • विस्कॉसिटी10 to 180 mm2/s at 50 C typical
  • सल्फरMax 0.10% m/m
  • खतराUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
सामान्य रंग, प्रयोगशाला काँच
ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) का प्रयोगशाला काँच नमूना, उसके सामान्य रंग में
गहरे स्टूडियो बैकग्राउंड पर प्रयोगशाला के काँच में ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) का नमूना, ताकि रंग आसानी से परखा जा सके।
संदर्भ तस्वीर
व्यवहार में ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) का भंडारण और परिवहन कैसे होता है।

चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) सामान्य तापमान पर ठोस है, इसलिए हिलाने के लिए कोई तरल नहीं है। 10 to 180 mm2/s at 50 C typical

यह कैसा दिखता है

Dark to black

इसका उपयोग कहाँ होता है

  • ECA fuel for ships without scrubbers
  • Alternative to LSMGO

हैंडलिंग और सुरक्षा

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

सामान्य गुण

रूप-रंग
Dark to black
15 °C पर डेंसिटी
860 to 950 kg/m³
फ़्लैश पॉइंट
Min 60 C
विस्कॉसिटी
10 to 180 mm2/s at 50 C typical
पोर पॉइंट
Varies by blend
सामान्य सल्फ़र
Max 0.10% m/m

◉What it is

ULSFO is a marine fuel designed to meet the 0.10 percent sulphur cap in ECAs without being a pure distillate. It is made from low sulphur components and is usually cheaper than LSMGO. Because the limit is so low, producing it from residue is challenging. It is not a formal ISO 8217 grade: it usually sits in the DMB or RMD/RME families with 0.10% sulphur. Supply is limited, and many ships simply use LSMGO.

⬡What it is made of

C15 to C50 mixture, mostly paraffinic and hydrotreated.

⚛रसायन विज्ञान

ULSFO is made by blending highly hydrotreated components, so it contains fewer aromatic and sulphur-bearing molecules than other residual fuels. The low sulphur level is the result of hydrodesulphurisation, which converts sulphur in organic molecules to H2S that is removed.

⚙How it is made

Hydrotreated residue, hydrocracker bottoms and distillate are blended; supply depends on the refinery.

▶How it works

Heated as a residual fuel. Low sulphur reduces acid corrosion but also cylinder oil cold corrosion if the engine uses high BN oil.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf demand is limited because there is no Gulf ECA, but ships heading to ECAs can buy low-sulphur fuels at Fujairah. ULSFO availability there is not stated.

मुख्य अणु

मानक और स्पेसिफिकेशन

MARPOL Annex VI Reg. 140.10% sulphur limit in ECAs from 1 January 2015 (IMO).
ISO 8217The applicable grade depends on viscosity; ULSFO is not a separate ISO grade.

ख़तरे

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.क्लास Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

इसका व्यापार कैसे होता है

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts ULSFO assessments (Singapore, Rotterdam, Fujairah)

Typical cargo

Barge deliveries

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

Not widely traded; priced between LSMGO and VLSFO.

इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव

121 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 40 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।

नक़्शे पर सभी 121 देखें

इसे संभालने वाले टर्मिनल

क्या आप जानते हैं

💡 ULSFO volumes are small compared with VLSFO.

💡 The 0.10 percent ECA limit has applied since 1 January 2015 (IMO).

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) पर ख़ुद को परखें

सवाल 1/3 · स्कोर 0 · लकीर 0

What sulphur does ULSFO have?

इस समूह में और

स्रोत

ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।