सामग्री पर जाएँ

Heavy fuels

Vacuum Residue

Vacuum residue is the heaviest material left after vacuum distillation. It is the feed for cokers, visbreakers, bitumen and fuel oil blends.

← सभी उत्पादअन्य नाम: Vacuum bottoms, VR, Vacuum tower bottoms, VTB, Short residue

  • फ़्लैश पॉइंटAbove 200 C typical
  • घनत्व1000 to 1060 kg/m³
  • विस्कॉसिटीVery high; over 1,000 mm2/s at 100 C
  • ठंड में प्रवाहOver 30 C (often semi-solid)
  • सल्फर1 to 6%
  • खतराUsually none, Often not dangerous goods; hot product
सामान्य रंग, प्रयोगशाला काँच
Vacuum Residue का प्रयोगशाला काँच नमूना, उसके सामान्य रंग में
गहरे स्टूडियो बैकग्राउंड पर प्रयोगशाला के काँच में Vacuum Residue का नमूना, ताकि रंग आसानी से परखा जा सके।
रंग पैमाना
Vacuum Residue में दिखने वाले जाने-पहचाने रंग।

चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.

तरल को हिलाकर उसका गाढ़ापन महसूस करें

माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।

अर्ध-ठोस
रंग Vacuum Residue के सामान्य रंग के अनुसार है।
पतला और ढीलागाढ़ा और भारी

अर्ध-ठोस सामान्य तापमान पर अर्ध-ठोस। यह केवल धीरे-धीरे सरकता है और पंप करने के लिए गर्म करना पड़ता है।

डेटा से सामान्य श्यानताVery high; over 1,000 mm2/s at 100 C

हिलाने की गति
0 px/s
तरल की गति
0%
शांत होने में लगा समय
-
सतह
स्थिर

यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।

यह कैसा दिखता है

Black, tar-like

इसका उपयोग कहाँ होता है

  • Coker feed
  • Visbreaker feed
  • Bitumen feed
  • Fuel oil blend

हैंडलिंग और सुरक्षा

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Extremely viscous hot product; burns can occur.

सामान्य गुण

रूप-रंग
Black, tar-like
15 °C पर डेंसिटी
1000 to 1060 kg/m³
फ़्लैश पॉइंट
Above 200 C typical
विस्कॉसिटी
Very high; over 1,000 mm2/s at 100 C
पोर पॉइंट
Over 30 C (often semi-solid)
सामान्य सल्फ़र
1 to 6%

◉What it is

Vacuum residue is the bottom product of a vacuum distillation unit, boiling above about 500 to 550 C. It is almost solid at room temperature and very rich in asphaltenes, metals and sulphur. Refiners upgrade it in delayed cokers, solvent deasphalters or hydrocrackers, or sell it as fuel oil blendstock or bitumen. Wikipedia describes bitumen as the heavy fraction boiling above about 500 C after vacuum distillation.

⬡What it is made of

C40+ hydrocarbons, asphaltenes, resins, heavy metals.

⚛रसायन विज्ञान

Vacuum residue contains large polycyclic aromatic structures with sulphur, nitrogen and metals (V, Ni). Asphaltenes are insoluble in n-heptane and make the oil stiff.

⚙How it is made

Bottom stream of a vacuum distillation unit operating at 380 to 410 C and under 10 to 40 mmHg.

▶How it works

Heated above 150 C to flow. Upgrading converts it to lighter products.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf refiners process vacuum residue in coking and residue upgrading units. Specific projects are not stated.

मुख्य अणु

मानक और स्पेसिफिकेशन

ASTM D5236Distillation of heavy hydrocarbon mixtures (vacuum potstill)
No standard gradeSold under contract spec

ख़तरे

Usually noneक्लास Often not dangerous goods; hot product

Extremely viscous hot product; burns can occur.

इसका व्यापार कैसे होता है

Units

Metric tonnes

Benchmarks

Platts assessments for related fuel oil

Typical cargo

Tanker parcels

Incoterms

FOB, CIF

Notes

Quality varies widely.

इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव

91 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 21 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।

नक़्शे पर सभी 91 देखें

इसे संभालने वाले टर्मिनल

क्या आप जानते हैं

💡 It can be so thick that it behaves like a solid at room temperature.

💡 Bitumen is the heavy fraction left after vacuum distillation.

Vacuum Residue पर ख़ुद को परखें

सवाल 1/3 · स्कोर 0 · लकीर 0

Vacuum residue is the bottom product of which unit?

इस समूह में और

स्रोत

ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।