सामग्री पर जाएँ

Heavy fuels

Residual Fuel Oil (RFO / MFO)

Residual fuel oil is what remains after lighter products are distilled from crude. It is thick, dense and sulphur-rich, and it is burned in ships, boilers and power plants.

← सभी उत्पादअन्य नाम: Mazut, MFO, Marine fuel oil, Fuel oil No. 6, Bunker C, Black oil

  • फ़्लैश पॉइंटMin 60 C typical (Wikipedia: about 65 C for No. 6)
  • घनत्व950 to 1030 kg/m³
  • विस्कॉसिटी50 to 700 mm2/s at 50 C
  • ठंड में प्रवाहUp to 30 C
  • सल्फर0.5 to 4% typical
  • खतराUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
सामान्य रंग, प्रयोगशाला काँच
Residual Fuel Oil (RFO / MFO) का प्रयोगशाला काँच नमूना, उसके सामान्य रंग में
गहरे स्टूडियो बैकग्राउंड पर प्रयोगशाला के काँच में Residual Fuel Oil (RFO / MFO) का नमूना, ताकि रंग आसानी से परखा जा सके।
संदर्भ तस्वीर
व्यवहार में Residual Fuel Oil (RFO / MFO) का भंडारण और परिवहन कैसे होता है।

चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.

तरल को हिलाकर उसका गाढ़ापन महसूस करें

माउस या उँगली तरल के ऊपर चलाएँ। ज़ोर से हिलाने के लिए दबाकर खींचें। कीबोर्ड: तीर कुंजियाँ हिलाती हैं, Space झकझोरता है।

बहुत गाढ़ा
रंग Residual Fuel Oil (RFO / MFO) के सामान्य रंग के अनुसार है।
पतला और ढीलागाढ़ा और भारी

बहुत गाढ़ा बहुत भारी। यह मुश्किल से हिलता है और धीरे-धीरे वापस बहता है।

डेटा से सामान्य श्यानता50 to 700 mm2/s at 50 C

हिलाने की गति
0 px/s
तरल की गति
0%
शांत होने में लगा समय
-
सतह
स्थिर

यह श्रेणी केवल अनुभव का मार्गदर्शन है। दिखाया गया श्यानता मान विनिर्देश डेटा का मान है।

यह कैसा दिखता है

Black, tarry

इसका उपयोग कहाँ होता है

  • Ship fuel
  • Power plant fuel
  • Industrial boilers
  • Cement kilns

हैंडलिंग और सुरक्षा

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

सामान्य गुण

रूप-रंग
Black, tarry
15 °C पर डेंसिटी
950 to 1030 kg/m³
फ़्लैश पॉइंट
Min 60 C typical (Wikipedia: about 65 C for No. 6)
विस्कॉसिटी
50 to 700 mm2/s at 50 C
पोर पॉइंट
Up to 30 C
सामान्य सल्फ़र
0.5 to 4% typical

◉What it is

Residual fuel oil is the heaviest liquid product of a refinery. It is the vacuum residue or atmospheric residue, usually blended with a lighter cutter stock to adjust viscosity. In the US it is fuel oil No. 6 or Bunker C; in Russia and Central Asia it is called mazut; in power industries it may be called MFO (marine fuel oil or mazut fuel oil). Density is about 0.95 to 1.03 g/cm3 (Wikipedia). It must be heated to flow: No. 6 needs preheating to about 104 to 127 C (Wikipedia). The fuel is cheap but polluting.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛रसायन विज्ञान

Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.

⚙How it is made

Vacuum distillation leaves vacuum residue, which can be visbroken to cut viscosity. The result is diluted with distillates.

▶How it works

Heated, filtered and atomised to burn in boilers and slow engines.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf refineries produce fuel oil and Fujairah stores and blends it. Central Asia uses mazut for power and heating. Volumes are not stated.

मुख्य अणु

मानक और स्पेसिफिकेशन

ISO 8217Marine residual grades
ASTM D396US fuel oil grades including No. 5 and No. 6
GOST 10585Russian mazut specification

ख़तरे

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.क्लास Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

इसका व्यापार कैसे होता है

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.4 to 6.6 bbl per mt.

Benchmarks

Platts FOB Arab Gulf HSFO 380 and fuel oil 180 assessments

Typical cargo

Tanker parcels 20,000 to 80,000 mt

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

Often sold by cargo, with large volumes from Gulf refineries.

इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव

91 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 21 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।

नक़्शे पर सभी 91 देखें

इसे संभालने वाले टर्मिनल

क्या आप जानते हैं

💡 No. 6 oil is also called Bunker C and needs preheating to about 104 to 127 C (Wikipedia).

💡 Residual fuel oil often has a density close to that of water, from about 0.95 to 1.03 g/cm3.

Residual Fuel Oil (RFO / MFO) पर ख़ुद को परखें

सवाल 1/3 · स्कोर 0 · लकीर 0

What is mazut?

इस समूह में और

स्रोत

ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।