Heavy fuels
VLSFO 0.5% (Very Low Sulphur Fuel Oil)
VLSFO is marine fuel with sulphur of 0.50 percent or less, created for the IMO 2020 global cap. It is now the main bunker fuel for ocean-going ships.
← सभी उत्पादअन्य नाम: VLSFO, 0.5% sulphur fuel oil, IMO 2020 fuel, Compliant fuel
- फ़्लैश पॉइंटMin 60 C
- घनत्व900 to 991 kg/m³
- विस्कॉसिटी30 to 380 mm2/s at 50 C depending on blend
- ठंड में प्रवाहVaries by blend; many are above 0 C and up to 30 C
- सल्फरMax 0.50% m/m (typically 0.40 to 0.50%)
- खतराUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


चित्र श्रेय प्रयोगशाला काँच के नमूने Wikimedia Commons पर मौजूद संदर्भ तस्वीरों से बनाए गए हैं, द्वारा Chemik10 (CC BY-SA 2.5) और एक CC0 पेट्रोलियम नमूना फ़ोटो.
VLSFO 0.5% (Very Low Sulphur Fuel Oil) सामान्य तापमान पर ठोस है, इसलिए हिलाने के लिए कोई तरल नहीं है। 30 to 380 mm2/s at 50 C depending on blend
यह कैसा दिखता है
Dark brown to black, opaque, and viscous like treacle at room temperature. It must be heated to pump. Appearance is not a quality test: a good and a bad VLSFO look the same, which is why laboratory results matter.
इसका उपयोग कहाँ होता है
- Deep-sea vessels without scrubbers
- Container ships and tankers
हैंडलिंग और सुरक्षा
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
सामान्य गुण
- रूप-रंग
- Black, may be waxy
- 15 °C पर डेंसिटी
- 900 to 991 kg/m³
- फ़्लैश पॉइंट
- Min 60 C
- विस्कॉसिटी
- 30 to 380 mm2/s at 50 C depending on blend
- पोर पॉइंट
- Varies by blend; many are above 0 C and up to 30 C
- सामान्य सल्फ़र
- Max 0.50% m/m (typically 0.40 to 0.50%)
◉What it is
VLSFO is a blend of residual and distillate components that meets the 0.50 percent global sulphur limit that took effect on 1 January 2020. Ships without scrubbers must use VLSFO or a more expensive distillate. The composition varies by supplier: some blends are waxy, some are aromatic, and some contain cracked material. That variety makes compatibility checking important. Many VLSFO grades meet ISO 8217 RMG 380 or RME 180 viscosity limits, but the parameters differ from the traditional high-sulphur fuel.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛रसायन विज्ञान
VLSFO blends are made from low-sulphur residues, hydrocracker bottoms and distillates. Paraffinic blends can precipitate wax at low temperature, while aromatic blends have better stability but higher density. Low sulphur means fewer sulphur-containing heteroatoms but not necessarily better stability.
⚙How it is made
Low sulphur residue from refining low sulphur crudes or hydrotreating residues is blended with distillate or cracked streams to meet viscosity and sulphur limits.
▶How it works
Heated as other residual fuels. Some blends need extra heating to avoid wax, and mixing batches can cause sludge. Combustion quality (CCAI or CII) varies.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
VLSFO is a main bunker fuel sold at Fujairah. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.
मुख्य अणु
मानक और स्पेसिफिकेशन
| ISO 8217 | Residual grades such as RMG 380 or RME 180; sulphur is set by MARPOL, not by the viscosity grade. |
|---|---|
| MARPOL Annex VI Reg. 14 | 0.50% global sulphur limit from 1 January 2020 (IMO). |
ख़तरे
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
इसका व्यापार कैसे होता है
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts VLSFO assessments at Fujairah, Singapore, Rotterdam, Houston
Typical cargo
Barge or bunker tanker deliveries of 500 to 5,000 mt
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
VLSFO is quoted per mt; prices track low sulphur residue and gasoil.
इसे बनाने वाली रिफ़ाइनरियाँ: हमारे सुझाव
121 सूचीबद्ध रिफ़ाइनरियाँ यह उत्पाद बनाती हैं, उनमें से 40 खाड़ी, ईरान और इराक़ में हैं। हम पहले खाड़ी के प्लांट, फिर चालू प्लांट, फिर क्षमता के हिसाब से रखते हैं।
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
- 5SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingएक्सपोर्ट एक्सेस
- 6YASREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingDeep conversionएक्सपोर्ट एक्सेस
इसे संभालने वाले टर्मिनल
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
क्या आप जानते हैं
💡 VLSFO is not a single product: each supplier blends it differently.
💡 The 0.50 percent global limit applied from 1 January 2020 (IMO).
VLSFO 0.5% (Very Low Sulphur Fuel Oil) पर ख़ुद को परखें
What is the VLSFO sulphur limit?
इस समूह में और
- HSFO 3.5% (High Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
- Furnace Oil
स्रोत
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Port of Fujairah (Wikipedia)
- Fujairah (Wikipedia)
ऊपर दिए स्रोतों के आधार पर PST के अपने शब्दों में लिखा गया। डेटा की विश्वसनीयता: medium। सामान्य मान मूल और अनुबंध के अनुसार बदलते हैं, इसलिए हमेशा अपने अनुबंध का स्पेसिफिकेशन पढ़ें।






