Heavy fuels
Cutter Stock
Cutter stock is a lighter oil blended into heavy residue to reduce its viscosity. Typical cutters are gasoil, kerosene or light cycle oil.
← Все продуктыДругие названия: Cutter, Cutterstock, Cutting oil (fuel oil), Viscosity cutter
- Плотность800 to 950 kg/m³
- Вязкость1 to 30 mm2/s at 40 C
- Интервал кипения170 to 400 °C
- ОпасностьDepends on the cutter (for example UN1202 for gasoil), Depends on the cutter; Class 3 if gasoil or kerosene

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.
Помешайте жидкость, чтобы почувствовать её густоту
Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.
Средняя Маслянистая. Волны медленнее и круглее.
Типичная вязкость по данным1 to 30 mm2/s at 40 C
- Скорость перемешивания
- 0 px/с
- Движение жидкости
- 0%
- Успокоилась через
- -
- Поверхность
- Покой
Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.
Внешний вид
Clear to dark
Где применяется
- Fuel oil blending
- Bitumen cutback
Обращение и безопасность
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Flammable if gasoil or kerosene.
Типичные свойства
- Внешний вид
- Clear to dark
- Плотность при 15 °C
- 800 to 950 kg/m³
- Интервал кипения
- 170 to 400 °C
- Вязкость
- 1 to 30 mm2/s at 40 C
- Температура застывания
- Varies
- Типичное содержание серы
- Varies
◉What it is
Cutter stock is any lighter petroleum stream used to dilute a heavy oil so it flows and meets a viscosity target. In fuel oil blending, it brings vacuum residue down to 180 or 380 mm2/s. Common cutters are gasoil, light cycle oil, kerosene, visbreaker gasoil and diesel. The cost, sulphur and density of the cutter directly affect the blend. Fuel oil blending is a major business at storage hubs.
⬡What it is made of
C10 to C25 distillate or cracked stock.
⚛Химия
Light aromatic and paraffinic hydrocarbons act as solvent for asphaltenes. Too much paraffinic cutter can destabilise asphaltenes.
⚙How it is made
Taken from distillation or cracking units.
▶How it works
Blending uses a viscosity blending index to calculate how much cutter is needed.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Blenders in Fujairah use distillate cutter, typically gasoil or light cycle oil, to make bunker fuel. Specific blending volumes are not stated.
Ключевые молекулы
Стандарты и спецификации
| ISO 8217 | The finished blend must meet the marine fuel specification. |
|---|---|
| ASTM D341 | Viscosity-temperature charts for liquid petroleum products. |
Опасности
Flammable if gasoil or kerosene.
Как им торгуют
Units
Metric tonnes
Benchmarks
Priced from gasoil or LCO
Typical cargo
Barge or tanker
Incoterms
FOB
Notes
Cost tied to gasoil.
НПЗ, которые его производят: наши рекомендации
НПЗ в списке, производящих этот продукт: 91, из них в странах Персидского залива, Иране и Ираке: 21. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionДоступ к экспорту
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingДоступ к экспорту
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingДоступ к экспорту
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingДоступ к экспорту
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
Терминалы, которые с ним работают
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Знаете ли вы
💡 Cutter stock cost can account for a large part of bunker blend price.
💡 Incompatible cutters can create sludge.
Проверьте себя: Cutter Stock
What does cutter do?
Ещё в этой группе
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Furnace Oil
Источники
Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.






