Heavy fuels
Furnace Oil
Furnace oil is a heavy residual fuel burned in industrial furnaces and boilers. It is a common name in South Asia for residual fuel oil.
← Все продуктыДругие названия: Furnace fuel oil, FO, LSHS, Fuel oil No. 5/6
- Температура вспышкиMin 66 C (IS 1593)
- Плотность930 to 1010 kg/m³
- ВязкостьUp to 370 mm2/s at 50 C in some grades
- Сера1.0 to 4.0%
- ОпасностьUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.


Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.
Помешайте жидкость, чтобы почувствовать её густоту
Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.
Очень густая Очень тяжёлая. Почти не движется и медленно растекается обратно.
Типичная вязкость по даннымUp to 370 mm2/s at 50 C in some grades
- Скорость перемешивания
- 0 px/с
- Движение жидкости
- 0%
- Успокоилась через
- -
- Поверхность
- Покой
Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.
Внешний вид
Black, viscous
Где применяется
- Industrial furnaces
- Boilers
- Power plants
Обращение и безопасность
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Типичные свойства
- Внешний вид
- Black, viscous
- Плотность при 15 °C
- 930 to 1010 kg/m³
- Температура вспышки
- Min 66 C (IS 1593)
- Вязкость
- Up to 370 mm2/s at 50 C in some grades
- Температура застывания
- Varies by grade and season
- Типичное содержание серы
- 1.0 to 4.0%
◉What it is
Furnace oil is another name for residual fuel oil used in industrial heating. In Wikipedia's fuel oil article, furnace fuel oil is listed as an alias for heavier grades such as No. 5 and No. 6. It must be preheated to 90 to 110 C before atomisation. Indian specification IS 1593 defines grades such as FO and LSHS (low sulphur heavy stock). Users include steel plants, textile mills and power stations.
⬡What it is made of
C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.
⚛Химия
Residual fuel contains large aromatic and naphthenic molecules, resins and asphaltenes, which are clusters of polycyclic aromatic rings with heteroatoms (S, N, O) and metals such as vanadium and nickel. Asphaltenes make the oil dense and viscous; resins keep them dispersed. Mixing incompatible fuels can precipitate asphaltenes as sludge.
⚙How it is made
Blended residual and cutter.
▶How it works
Preheated, atomised and burned in industrial burners.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Gulf residual fuel supplies South Asia and Africa. Central Asia may buy mazut-type fuel. Volumes are not stated.
Ключевые молекулы
Стандарты и спецификации
| IS 1593 | Indian furnace oil standard |
|---|---|
| ASTM D396 No. 6 | US counterpart |
Опасности
Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.
Как им торгуют
Units
Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.
Benchmarks
Platts Singapore and Arab Gulf fuel oil assessments
Typical cargo
Tanker parcels
Incoterms
FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).
Notes
Used in South Asia.
НПЗ, которые его производят: наши рекомендации
НПЗ в списке, производящих этот продукт: 91, из них в странах Персидского залива, Иране и Ираке: 21. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionДоступ к экспорту
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingДоступ к экспорту
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingДоступ к экспорту
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingДоступ к экспорту
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
Терминалы, которые с ним работают
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Знаете ли вы
💡 Furnace oil is sometimes called mazut in Russia.
💡 Furnace oil must be preheated before atomisation.
Проверьте себя: Furnace Oil
Furnace oil is a type of?
Ещё в этой группе
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Slurry Oil (Decant Oil)
- Cutter Stock
Источники
Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.






