Перейти к содержимому

Heavy fuels

VLSFO 0.5% (Very Low Sulphur Fuel Oil)

VLSFO is marine fuel with sulphur of 0.50 percent or less, created for the IMO 2020 global cap. It is now the main bunker fuel for ocean-going ships.

← Все продуктыДругие названия: VLSFO, 0.5% sulphur fuel oil, IMO 2020 fuel, Compliant fuel

  • Температура вспышкиMin 60 C
  • Плотность900 to 991 kg/m³
  • Вязкость30 to 380 mm2/s at 50 C depending on blend
  • Низкотемпературная текучестьVaries by blend; many are above 0 C and up to 30 C
  • СераMax 0.50% m/m (typically 0.40 to 0.50%)
  • ОпасностьUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
Типичный цвет, лабораторная посуда
Проба в лабораторном стекле, типичный цвет: VLSFO 0.5% (Very Low Sulphur Fuel Oil)
Образец VLSFO 0.5% (Very Low Sulphur Fuel Oil) в лабораторной стеклянной таре на тёмном студийном фоне, чтобы цвет было легко оценить.
Эталонная фотография
Как VLSFO 0.5% (Very Low Sulphur Fuel Oil) хранят и перевозят на практике.

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.

VLSFO 0.5% (Very Low Sulphur Fuel Oil) при нормальной температуре является твёрдым веществом, поэтому перемешивать нечего. 30 to 380 mm2/s at 50 C depending on blend

Внешний вид

Dark brown to black, opaque, and viscous like treacle at room temperature. It must be heated to pump. Appearance is not a quality test: a good and a bad VLSFO look the same, which is why laboratory results matter.

Где применяется

  • Deep-sea vessels without scrubbers
  • Container ships and tankers

Обращение и безопасность

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Типичные свойства

Внешний вид
Black, may be waxy
Плотность при 15 °C
900 to 991 kg/m³
Температура вспышки
Min 60 C
Вязкость
30 to 380 mm2/s at 50 C depending on blend
Температура застывания
Varies by blend; many are above 0 C and up to 30 C
Типичное содержание серы
Max 0.50% m/m (typically 0.40 to 0.50%)

◉What it is

VLSFO is a blend of residual and distillate components that meets the 0.50 percent global sulphur limit that took effect on 1 January 2020. Ships without scrubbers must use VLSFO or a more expensive distillate. The composition varies by supplier: some blends are waxy, some are aromatic, and some contain cracked material. That variety makes compatibility checking important. Many VLSFO grades meet ISO 8217 RMG 380 or RME 180 viscosity limits, but the parameters differ from the traditional high-sulphur fuel.

⬡What it is made of

C20 to C70+ hydrocarbons: aromatics, naphthenes, resins and asphaltenes, with sulphur, nitrogen and metals.

⚛Химия

VLSFO blends are made from low-sulphur residues, hydrocracker bottoms and distillates. Paraffinic blends can precipitate wax at low temperature, while aromatic blends have better stability but higher density. Low sulphur means fewer sulphur-containing heteroatoms but not necessarily better stability.

⚙How it is made

Low sulphur residue from refining low sulphur crudes or hydrotreating residues is blended with distillate or cracked streams to meet viscosity and sulphur limits.

▶How it works

Heated as other residual fuels. Some blends need extra heating to avoid wax, and mixing batches can cause sludge. Combustion quality (CCAI or CII) varies.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

VLSFO is a main bunker fuel sold at Fujairah. Fujairah is one of the world's largest bunkering hubs, alongside Singapore and Rotterdam, and lies just outside the Strait of Hormuz on the Gulf of Oman (Wikipedia). Its oil industry zone has about 10 million cubic metres of refined-product storage (Wikipedia, year not given). Current bunker volumes by grade are not stated.

Ключевые молекулы

Стандарты и спецификации

ISO 8217Residual grades such as RMG 380 or RME 180; sulphur is set by MARPOL, not by the viscosity grade.
MARPOL Annex VI Reg. 140.50% global sulphur limit from 1 January 2020 (IMO).

Опасности

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.Класс Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Как им торгуют

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts VLSFO assessments at Fujairah, Singapore, Rotterdam, Houston

Typical cargo

Barge or bunker tanker deliveries of 500 to 5,000 mt

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

VLSFO is quoted per mt; prices track low sulphur residue and gasoil.

НПЗ, которые его производят: наши рекомендации

НПЗ в списке, производящих этот продукт: 121, из них в странах Персидского залива, Иране и Ираке: 40. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.

Показать все (121) на карте

Терминалы, которые с ним работают

Знаете ли вы

💡 VLSFO is not a single product: each supplier blends it differently.

💡 The 0.50 percent global limit applied from 1 January 2020 (IMO).

Проверьте себя: VLSFO 0.5% (Very Low Sulphur Fuel Oil)

Вопрос 1 из 3 · Счёт 0 · Серия 0

What is the VLSFO sulphur limit?

Открыть страницу спецификации PST

Ещё в этой группе

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.