Перейти к содержимому

Heavy fuels

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)

ULSFO is a residual or blended fuel with sulphur at or below 0.10 percent. It is used in emission control areas in place of distillate fuel.

← Все продуктыДругие названия: ULSFO, 0.1% sulphur fuel oil, ECA fuel oil

  • Температура вспышкиMin 60 C
  • Плотность860 to 950 kg/m³
  • Вязкость10 to 180 mm2/s at 50 C typical
  • СераMax 0.10% m/m
  • ОпасностьUsually none. Depending on the description and temperature, shippers may use UN3082 or UN3257., Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.
Типичный цвет, лабораторная посуда
Проба в лабораторном стекле, типичный цвет: ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
Образец ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) в лабораторной стеклянной таре на тёмном студийном фоне, чтобы цвет было легко оценить.
Эталонная фотография
Как ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) хранят и перевозят на практике.

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.

ULSFO 0.1% (Ultra Low Sulphur Fuel Oil) при нормальной температуре является твёрдым веществом, поэтому перемешивать нечего. 10 to 180 mm2/s at 50 C typical

Внешний вид

Dark to black

Где применяется

  • ECA fuel for ships without scrubbers
  • Alternative to LSMGO

Обращение и безопасность

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Типичные свойства

Внешний вид
Dark to black
Плотность при 15 °C
860 to 950 kg/m³
Температура вспышки
Min 60 C
Вязкость
10 to 180 mm2/s at 50 C typical
Температура застывания
Varies by blend
Типичное содержание серы
Max 0.10% m/m

◉What it is

ULSFO is a marine fuel designed to meet the 0.10 percent sulphur cap in ECAs without being a pure distillate. It is made from low sulphur components and is usually cheaper than LSMGO. Because the limit is so low, producing it from residue is challenging. It is not a formal ISO 8217 grade: it usually sits in the DMB or RMD/RME families with 0.10% sulphur. Supply is limited, and many ships simply use LSMGO.

⬡What it is made of

C15 to C50 mixture, mostly paraffinic and hydrotreated.

⚛Химия

ULSFO is made by blending highly hydrotreated components, so it contains fewer aromatic and sulphur-bearing molecules than other residual fuels. The low sulphur level is the result of hydrodesulphurisation, which converts sulphur in organic molecules to H2S that is removed.

⚙How it is made

Hydrotreated residue, hydrocracker bottoms and distillate are blended; supply depends on the refinery.

▶How it works

Heated as a residual fuel. Low sulphur reduces acid corrosion but also cylinder oil cold corrosion if the engine uses high BN oil.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf demand is limited because there is no Gulf ECA, but ships heading to ECAs can buy low-sulphur fuels at Fujairah. ULSFO availability there is not stated.

Ключевые молекулы

Стандарты и спецификации

MARPOL Annex VI Reg. 140.10% sulphur limit in ECAs from 1 January 2015 (IMO).
ISO 8217The applicable grade depends on viscosity; ULSFO is not a separate ISO grade.

Опасности

Usually none. Depending on the description and temperature, shippers may use UN3082 or UN3257.Класс Often not classified as dangerous goods for transport (flash point above 60 C). Class 9 if shipped under UN3082 (environmentally hazardous substance, liquid, n.o.s.) or UN3257 (elevated temperature liquid, n.o.s.). Check the supplier's safety data sheet.

Hot product can cause burns. Residual fuels contain polycyclic aromatics and can release hydrogen sulphide in tank headspace. Spills are very damaging to marine life.

Как им торгуют

Units

Metric tonnes (bunkers priced per mt); barrels for refinery trade at about 6.3 bbl per mt.

Benchmarks

Platts ULSFO assessments (Singapore, Rotterdam, Fujairah)

Typical cargo

Barge deliveries

Incoterms

FOB (load port), CIF or CFR, DAP at bunker port or delivered ex-wharf (barge).

Notes

Not widely traded; priced between LSMGO and VLSFO.

НПЗ, которые его производят: наши рекомендации

НПЗ в списке, производящих этот продукт: 121, из них в странах Персидского залива, Иране и Ираке: 40. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.

Показать все (121) на карте

Терминалы, которые с ним работают

Знаете ли вы

💡 ULSFO volumes are small compared with VLSFO.

💡 The 0.10 percent ECA limit has applied since 1 January 2015 (IMO).

Проверьте себя: ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)

Вопрос 1 из 3 · Счёт 0 · Серия 0

What sulphur does ULSFO have?

Ещё в этой группе

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.