Перейти к содержимому

Heavy fuels

Vacuum Residue

Vacuum residue is the heaviest material left after vacuum distillation. It is the feed for cokers, visbreakers, bitumen and fuel oil blends.

← Все продуктыДругие названия: Vacuum bottoms, VR, Vacuum tower bottoms, VTB, Short residue

  • Температура вспышкиAbove 200 C typical
  • Плотность1000 to 1060 kg/m³
  • ВязкостьVery high; over 1,000 mm2/s at 100 C
  • Низкотемпературная текучестьOver 30 C (often semi-solid)
  • Сера1 to 6%
  • ОпасностьUsually none, Often not dangerous goods; hot product
Типичный цвет, лабораторная посуда
Проба в лабораторном стекле, типичный цвет: Vacuum Residue
Образец Vacuum Residue в лабораторной стеклянной таре на тёмном студийном фоне, чтобы цвет было легко оценить.
Цветовая шкала
Цвета, которые обычно имеет Vacuum Residue.

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.

Помешайте жидкость, чтобы почувствовать её густоту

Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.

Полутвёрдый
Цвет соответствует типичному цвету Vacuum Residue.
Жидкая и подвижнаяГустая и тяжёлая

Полутвёрдый При обычной температуре полутвёрдый. Лишь медленно ползёт, для перекачки его нужно нагревать.

Типичная вязкость по даннымVery high; over 1,000 mm2/s at 100 C

Скорость перемешивания
0 px/с
Движение жидкости
0%
Успокоилась через
-
Поверхность
Покой

Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.

Внешний вид

Black, tar-like

Где применяется

  • Coker feed
  • Visbreaker feed
  • Bitumen feed
  • Fuel oil blend

Обращение и безопасность

  • Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
  • Extremely viscous hot product; burns can occur.

Типичные свойства

Внешний вид
Black, tar-like
Плотность при 15 °C
1000 to 1060 kg/m³
Температура вспышки
Above 200 C typical
Вязкость
Very high; over 1,000 mm2/s at 100 C
Температура застывания
Over 30 C (often semi-solid)
Типичное содержание серы
1 to 6%

◉What it is

Vacuum residue is the bottom product of a vacuum distillation unit, boiling above about 500 to 550 C. It is almost solid at room temperature and very rich in asphaltenes, metals and sulphur. Refiners upgrade it in delayed cokers, solvent deasphalters or hydrocrackers, or sell it as fuel oil blendstock or bitumen. Wikipedia describes bitumen as the heavy fraction boiling above about 500 C after vacuum distillation.

⬡What it is made of

C40+ hydrocarbons, asphaltenes, resins, heavy metals.

⚛Химия

Vacuum residue contains large polycyclic aromatic structures with sulphur, nitrogen and metals (V, Ni). Asphaltenes are insoluble in n-heptane and make the oil stiff.

⚙How it is made

Bottom stream of a vacuum distillation unit operating at 380 to 410 C and under 10 to 40 mmHg.

▶How it works

Heated above 150 C to flow. Upgrading converts it to lighter products.

▣Storage, loading and inspection

Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.

★Why it matters in the Gulf

Gulf refiners process vacuum residue in coking and residue upgrading units. Specific projects are not stated.

Ключевые молекулы

Стандарты и спецификации

ASTM D5236Distillation of heavy hydrocarbon mixtures (vacuum potstill)
No standard gradeSold under contract spec

Опасности

Usually noneКласс Often not dangerous goods; hot product

Extremely viscous hot product; burns can occur.

Как им торгуют

Units

Metric tonnes

Benchmarks

Platts assessments for related fuel oil

Typical cargo

Tanker parcels

Incoterms

FOB, CIF

Notes

Quality varies widely.

НПЗ, которые его производят: наши рекомендации

НПЗ в списке, производящих этот продукт: 91, из них в странах Персидского залива, Иране и Ираке: 21. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.

Показать все (91) на карте

Терминалы, которые с ним работают

Знаете ли вы

💡 It can be so thick that it behaves like a solid at room temperature.

💡 Bitumen is the heavy fraction left after vacuum distillation.

Проверьте себя: Vacuum Residue

Вопрос 1 из 3 · Счёт 0 · Серия 0

Vacuum residue is the bottom product of which unit?

Ещё в этой группе

Источники

Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.