Heavy fuels
Slurry Oil (Decant Oil)
Slurry oil is the heavy bottom product of an FCC fractionator. After settling out catalyst it is called clarified slurry or decant oil.
← Все продуктыДругие названия: FCC slurry, Clarified slurry oil, CSO, Decant oil, FCC bottoms
- Температура вспышкиAbove 100 C typical
- Плотность990 to 1100 kg/m³
- ВязкостьVaries; 20 to 200 mm2/s at 100 C
- Низкотемпературная текучестьAbove 20 C typical
- Сера0.5 to 3%
- Интервал кипения340 to 600 °C

Авторство изображений Образцы в лабораторной посуде созданы по эталонным фотографиям с Wikimedia Commons, автор: Chemik10 (CC BY-SA 2.5) и фото образца нефти с лицензией CC0.
Помешайте жидкость, чтобы почувствовать её густоту
Проведите мышью или пальцем по жидкости. Нажмите и тяните, чтобы помешать сильнее. Клавиатура: стрелки перемешивают, пробел встряхивает.
Очень густая Очень тяжёлая. Почти не движется и медленно растекается обратно.
Типичная вязкость по даннымVaries; 20 to 200 mm2/s at 100 C
- Скорость перемешивания
- 0 px/с
- Движение жидкости
- 0%
- Успокоилась через
- -
- Поверхность
- Покой
Класс служит ориентиром для ощущения. Показанное значение вязкости взято из данных спецификации.
Внешний вид
Black, viscous
Где применяется
- Carbon black feedstock
- Needle coke feedstock
- Fuel oil blendstock
Обращение и безопасность
- Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
- Contains aromatics and may carry carcinogenic polycyclic aromatics.
Типичные свойства
- Внешний вид
- Black, viscous
- Плотность при 15 °C
- 990 to 1100 kg/m³
- Интервал кипения
- 340 to 600 °C
- Температура вспышки
- Above 100 C typical
- Вязкость
- Varies; 20 to 200 mm2/s at 100 C
- Температура застывания
- Above 20 C typical
- Типичное содержание серы
- 0.5 to 3%
◉What it is
Slurry oil is the heavy aromatic liquid left at the base of an FCC main fractionator. It contains catalyst fines, so some is recycled and some is sent to a settler. The clear oil from the top of the settler is decant oil (Wikipedia). It is a feed for carbon black, needle coke and carbon fibre production, and a blendstock for heavy fuel oil.
⬡What it is made of
Highly aromatic C20 to C50 hydrocarbons, polynuclear aromatics.
⚛Химия
Slurry oil is rich in condensed aromatic rings, which gives high density and a high carbon content. This makes it a good carbon black or needle coke feed.
⚙How it is made
Fractionation at the bottom of an FCC main column; settling removes catalyst fines.
▶How it works
Aromatics burn with a smoky flame but give good carbon yield in carbon black reactors.
▣Storage, loading and inspection
Store in heated tanks, typically 40 to 50 C for pumping and 100 to 150 C for centrifuge and injection, with the temperature kept at least 10 C above the pour point and below 20 C under flash point. Avoid overheating that causes coking. Check for incompatibility when mixing batches (ASTM D4740 spot test or D7060). Sampling follows ISO 3170 or ISO 3171 with MARPOL retained sample. Inspect for water, catalytic fines (aluminium plus silicon) and total sediment.
★Why it matters in the Gulf
Slurry oil is produced wherever refineries run FCC units. Gulf volumes and uses are not stated.
Ключевые молекулы
Стандарты и спецификации
| ASTM D4294 | Test method for sulphur by energy-dispersive X-ray fluorescence. |
|---|---|
| Contract specification | Typically density, sulphur, catalyst fines and BMCI. |
Опасности
Contains aromatics and may carry carcinogenic polycyclic aromatics.
Как им торгуют
Units
Metric tonnes
Benchmarks
Platts FCC slurry oil assessments (USGC), HSFO as reference
Typical cargo
Tanker or barge parcels
Incoterms
FOB, CIF
Notes
Priced against HSFO or carbon black demand.
НПЗ, которые его производят: наши рекомендации
НПЗ в списке, производящих этот продукт: 91, из них в странах Персидского залива, Иране и Ираке: 21. Сначала идут заводы Персидского залива, затем действующие, затем по мощности.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionДоступ к экспорту
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingДоступ к экспорту
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
- 4SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingДоступ к экспорту
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingДоступ к экспорту
- 6Abadan Refinery
Iran · 400,000 bpdGulf locationOperatingDeep conversionДоступ к экспорту
Терминалы, которые с ним работают
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Знаете ли вы
💡 Slurry oil contains residual catalyst fines that can wear pumps.
💡 Decant oil is used as a fuel oil blending stock or carbon black feedstock (Wikipedia).
Проверьте себя: Slurry Oil (Decant Oil)
What is clarified slurry oil also called?
Ещё в этой группе
- HSFO 3.5% (High Sulphur Fuel Oil)
- VLSFO 0.5% (Very Low Sulphur Fuel Oil)
- ULSFO 0.1% (Ultra Low Sulphur Fuel Oil)
- IFO 380 and IFO 180
- Bunker Fuel (ISO 8217 Grades)
- Residual Fuel Oil (RFO / MFO)
- Vacuum Gasoil (VGO)
- Vacuum Residue
- Cutter Stock
- Furnace Oil
Источники
Написано собственными словами PST по источникам выше. Достоверность данных: medium. Типичные значения зависят от происхождения и контракта, поэтому всегда читайте спецификацию в своём контракте.






