Middle distillates
Automotive Gasoil (AGO)
Automotive gasoil is the commercial name for diesel sold for road vehicles in many export markets. It is commonly traded in 10 ppm, 50 ppm and 500 ppm grades.
← Tutti i prodottiDetto anche: AGO, Automotive diesel oil, ADO, High speed diesel (HSD)
- Punto di infiammabilitàAbove 55 C typical
- Densità815 to 860 kg/m³
- Viscosità2.0 to 4.5 mm2/s at 40 C typical
- ZolfoContract dependent: 10, 50, 500 ppm or higher
- Intervallo di ebollizione170 to 380 °C
- PericoloUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0. Fotografia: realizzata da una foto di riferimento di DanTD, CC BY-SA 3.0, tramite Wikimedia Commons.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Fluido Leggero e scorrevole. Le onde si propagano veloci e si smorzano lentamente.
Viscosità tipica dai dati2.0 to 4.5 mm2/s at 40 C typical
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Clear to yellow
Dove si usa
- Trucks, buses and cars
- Taxis and fleets
- Small power plants
- Fishing and coastal vessels
Manipolazione e sicurezza
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Proprietà tipiche
- Aspetto
- Clear to yellow
- Densità a 15 °C
- 815 to 860 kg/m³
- Intervallo di ebollizione
- 170 to 380 °C
- Punto di infiammabilità
- Above 55 C typical
- Viscosità
- 2.0 to 4.5 mm2/s at 40 C typical
- Punto di scorrimento
- Varies
- Zolfo tipico
- Contract dependent: 10, 50, 500 ppm or higher
◉What it is
AGO is a trade term, not a single standard. It describes road-use diesel as supplied in West Africa, East Africa and parts of Asia, usually with a stated sulphur level and the density and cetane needed for vehicles. In India and Pakistan similar fuel is called high speed diesel (HSD). The specification is set by the buyer's national rules. Contracts typically list sulphur, density, cetane index, flash point, distillation and water content.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛La chimica
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Produced like other diesel by distillation and hydrotreating, blended to meet national specification.
▶How it works
Behaves as a normal automotive diesel: cetane for ignition, density for energy content, cold-flow for winter operation. Because specifications differ by country, the same cargo may be compliant in one market and off-spec in another.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refiners and Fujairah storage supply AGO to East Africa, Pakistan and the Red Sea region. Because buyer specifications differ, blending at Fujairah is a common service. Volumes are not stated.
Molecole chiave
Norme e specifiche
| EN 590 or national specifications | The importing country's own standard, for example those of Nigeria, Ghana, Kenya or India, often modelled on EN 590. |
|---|---|
| ASTM D975 | US diesel specification, referenced for some Americas and Asian cargoes. |
Pericoli
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Come si commercializza
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts FOB Arab Gulf gasoil and Mediterranean gasoil assessments
Typical cargo
Typically 25,000 to 37,000 mt
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Always confirm sulphur and cetane with the contract and port authority.
Raffinerie che lo producono: i nostri suggerimenti
152 raffinerie censite producono questo prodotto, 42 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAccesso all'esportazione
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingAccesso all'esportazione
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAccesso all'esportazione
Vedere tutti i 152 sulla mappa
Terminal che lo movimentano
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Lo sapeva?
💡 In many West African markets AGO is the pump name for diesel.
💡 Sulphur limits for AGO differ widely between importing countries.
Si metta alla prova su Automotive Gasoil (AGO)
What does AGO stand for?
Altro in questo gruppo
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.







