Passare al contenuto

Middle distillates

Gasoil 50 ppm

Gasoil 50 ppm is a middle distillate with sulphur limited to 50 ppm (0.005% m/m). It is a common export diesel grade for markets whose vehicle standards do not yet require 10 ppm.

← Tutti i prodottiDetto anche: Diesel 50 ppm, Euro 4 diesel, Gasoil 0.005% S

  • Punto di infiammabilitàAbove 55 C typical (min 52 to 60 C depending on contract)
  • Densità820 to 860 kg/m³
  • Viscosità2.0 to 4.5 mm2/s at 40 C typical
  • ZolfoMax 50 ppm (0.005% m/m)
  • Intervallo di ebollizione170 to 375 °C
  • PericoloUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)
Colore tipico, vetro da laboratorio
Campione in vetro da laboratorio di Gasoil 50 ppm, nel suo colore tipico
Un campione di Gasoil 50 ppm in vetro da laboratorio su sfondo scuro da studio, per valutare facilmente il colore.
Fotografia di riferimento
Come Gasoil 50 ppm viene stoccato e movimentato nella pratica.

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0. Fotografia: realizzata da una foto di riferimento di DanTD, CC BY-SA 3.0, tramite Wikimedia Commons.

Agitate il liquido per sentire quanto è denso

Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.

Fluido
Il colore segue il colore tipico di Gasoil 50 ppm.
Fluido e scorrevoleDenso e pesante

Fluido Leggero e scorrevole. Le onde si propagano veloci e si smorzano lentamente.

Viscosità tipica dai dati2.0 to 4.5 mm2/s at 40 C typical

Velocità di agitazione
0 px/s
Movimento del liquido
0%
Si calma dopo
-
Superficie
Fermo

La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.

Aspetto

Clear to pale yellow, may be dyed by local rule

Dove si usa

  • Road diesel in markets that still allow this sulphur level
  • Power generation and industrial burners
  • Mining and construction equipment
  • Agricultural and fishing vessels

Manipolazione e sicurezza

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

Proprietà tipiche

Aspetto
Clear to pale yellow, may be dyed by local rule
Densità a 15 °C
820 to 860 kg/m³
Intervallo di ebollizione
170 to 375 °C
Punto di infiammabilità
Above 55 C typical (min 52 to 60 C depending on contract)
Viscosità
2.0 to 4.5 mm2/s at 40 C typical
Punto di scorrimento
Varies by season
Zolfo tipico
Max 50 ppm (0.005% m/m)

◉What it is

Gasoil 50 ppm is a diesel-range fuel that has been hydrotreated to a moderate sulphur level. It is sold to countries and industries that use it for road transport, power generation and machinery. The sulphur level matches Euro 4 era vehicle rules, so engines with advanced exhaust filters should not use it. It has the same basic boiling range and cetane behaviour as 10 ppm diesel but a higher sulphur content. Contracts often state the exact sulphur limit, density, cetane index, flash point and distillation requirements. Intermediate grade between 500 ppm and 10 ppm.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛La chimica

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Atmospheric distillation provides straight-run gasoil which is hydrotreated at less severity than 10 ppm production. Blending with other treated cuts adjusts density and cold flow.

▶How it works

Sulphur burns to sulphur oxides, so higher sulphur means more SO2 and particulate emissions and faster wear on catalysts. Cetane and cold-flow behave like other diesel grades. Because sulphur is moderate, natural lubricity is generally adequate without extra additive.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Gulf refiners export 50 ppm gasoil to importers whose standards sit between 500 ppm and 10 ppm, with storage and blending at Fujairah. Volumes are not stated.

Molecole chiave

Norme e specifiche

EN 590 (older editions)European road diesel was limited to 50 mg/kg sulphur from 2005, before the 10 mg/kg limit from 2009 (Wikipedia).
ASTM D975 S15 and S500US grades with 15 ppm and 500 ppm maximum sulphur; there is no US 50 ppm grade.
Contract or national specificationMany importing countries set their own limits.

Pericoli

UN1202Classe Class 3 flammable liquid, packing group III (ADR/IMDG)

Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

Come si commercializza

Units

Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.

Benchmarks

Platts FOB Arab Gulf gasoil assessments; sulphur grade quoted separately from the 10 ppm price

Typical cargo

Typically 30,000 mt MR parcels or 5,000 to 10,000 mt coastal cargoes

Incoterms

FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.

Notes

Pricing usually carries a differential to 10 ppm diesel because of the lower value of the higher-sulphur grade.

Raffinerie che lo producono: i nostri suggerimenti

152 raffinerie censite producono questo prodotto, 42 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.

Vedere tutti i 152 sulla mappa

Terminal che lo movimentano

Lo sapeva?

💡 50 ppm equals 0.005 percent by mass.

💡 The EU moved from 50 mg/kg to 10 mg/kg diesel sulphur from 2009 (Wikipedia).

Si metta alla prova su Gasoil 50 ppm

Domanda 1 di 3 · Punteggio 0 · Serie 0

What is the sulphur limit in Gasoil 50 ppm?

Altro in questo gruppo

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.