Middle distillates
Gasoil 500 ppm
Gasoil 500 ppm is a middle distillate with sulphur limited to 500 ppm (0.05% m/m). It is a common export diesel grade for markets whose vehicle standards do not yet require 10 ppm.
← Tutti i prodottiDetto anche: Gasoil 0.05% S, Diesel 500 ppm, Low sulphur gasoil 0.05%
- Punto di infiammabilitàAbove 55 C typical (min 52 to 60 C depending on contract)
- Densità820 to 860 kg/m³
- Viscosità2.0 to 4.5 mm2/s at 40 C typical
- ZolfoMax 500 ppm (0.05% m/m)
- Intervallo di ebollizione170 to 375 °C
- PericoloUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0. Fotografia: realizzata da una foto di riferimento di DanTD, CC BY-SA 3.0, tramite Wikimedia Commons.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Fluido Leggero e scorrevole. Le onde si propagano veloci e si smorzano lentamente.
Viscosità tipica dai dati2.0 to 4.5 mm2/s at 40 C typical
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Clear and bright, pale yellow to light amber. A slight dark tint is normal at the top of the range. Haze means water, and a dark or brown fuel means contamination, oxidation or a heavy cut. Some markets dye diesel red for off-road or tax reasons.
Dove si usa
- Road diesel in markets that still allow this sulphur level
- Power generation and industrial burners
- Mining and construction equipment
- Agricultural and fishing vessels
Manipolazione e sicurezza
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Proprietà tipiche
- Aspetto
- Clear to pale yellow, may be dyed by local rule
- Densità a 15 °C
- 820 to 860 kg/m³
- Intervallo di ebollizione
- 170 to 375 °C
- Punto di infiammabilità
- Above 55 C typical (min 52 to 60 C depending on contract)
- Viscosità
- 2.0 to 4.5 mm2/s at 40 C typical
- Punto di scorrimento
- Varies by season
- Zolfo tipico
- Max 500 ppm (0.05% m/m)
◉What it is
Gasoil 500 ppm is a diesel-range fuel that has been hydrotreated to a moderate sulphur level. It is sold to countries and industries that use it for road transport, power generation and machinery. The sulphur level matches Euro 2 to Euro 3 era vehicle rules, so engines with advanced exhaust filters should not use it. It has the same basic boiling range and cetane behaviour as 10 ppm diesel but a higher sulphur content. Contracts often state the exact sulphur limit, density, cetane index, flash point and distillation requirements. Traditional export grade for markets without 10 ppm rules.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛La chimica
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Atmospheric distillation provides straight-run gasoil which is hydrotreated at less severity than 10 ppm production. Blending with other treated cuts adjusts density and cold flow.
▶How it works
Sulphur burns to sulphur oxides, so higher sulphur means more SO2 and particulate emissions and faster wear on catalysts. Cetane and cold-flow behave like other diesel grades. Because sulphur is moderate, natural lubricity is generally adequate without extra additive.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refiners have long exported gasoil of 500 ppm sulphur or higher to East Africa, South Asia and the Red Sea region, with storage and blending at Fujairah. Many importers are tightening limits, so this grade is likely shrinking. Volumes are not stated.
Molecole chiave




Norme e specifiche
| EN 590 (older editions) | Earlier European diesel sulphur limits were 350 mg/kg until the end of 2004, then 50 mg/kg, then 10 mg/kg from 2009. A 500 ppm level belongs to older vehicle-standard generations. |
|---|---|
| ASTM D975 S500 | US diesel grade with 500 ppm maximum sulphur. |
| Contract or national specification | Many importing countries set their own limits. |
Pericoli
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Come si commercializza
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts FOB Arab Gulf gasoil assessments; sulphur grade quoted separately from the 10 ppm price
Typical cargo
Typically 30,000 mt MR parcels or 5,000 to 10,000 mt coastal cargoes
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Pricing usually carries a differential to 10 ppm diesel because of the lower value of the higher-sulphur grade.
Raffinerie che lo producono: i nostri suggerimenti
152 raffinerie censite producono questo prodotto, 42 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAccesso all'esportazione
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingAccesso all'esportazione
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAccesso all'esportazione
Vedere tutti i 152 sulla mappa
Terminal che lo movimentano
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Lo sapeva?
💡 500 ppm equals 0.05 percent by mass.
💡 Many importing countries have been moving to 50 ppm or 10 ppm limits.
Si metta alla prova su Gasoil 500 ppm
What is the sulphur limit in Gasoil 500 ppm?
Vedere la pagina delle specifiche PST
Altro in questo gruppo
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.



