Passare al contenuto

Middle distillates

Marine Gasoil MGO (DMA)

MGO is a clear distillate marine fuel specified as DMA in ISO 8217. It is used in smaller engines, auxiliary engines and ships operating in emission control areas.

← Tutti i prodottiDetto anche: MGO, DMA, Marine gas oil, Marine diesel oil (loosely)

  • Punto di infiammabilitàMin 60 C (ISO 8217)
  • Densità800 to 890 kg/m³
  • Viscosità2.0 to 6.0 mm2/s at 40 C
  • Flusso a freddoWinter max 0 C; summer max 6 C (ISO 8217)
  • ZolfoMax 1.0% historically; typically below 0.10% for LSMGO
  • Intervallo di ebollizione170 to 380 °C
Colore tipico, vetro da laboratorio
Campione in vetro da laboratorio di Marine Gasoil MGO (DMA), nel suo colore tipico
Un campione di Marine Gasoil MGO (DMA) in vetro da laboratorio su sfondo scuro da studio, per valutare facilmente il colore.
Fotografia di riferimento
Come Marine Gasoil MGO (DMA) viene stoccato e movimentato nella pratica.

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0. Fotografia: realizzata da una foto di riferimento di Грищук ЮН, CC BY-SA 3.0, tramite Wikimedia Commons.

Agitate il liquido per sentire quanto è denso

Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.

Fluido
Il colore segue il colore tipico di Marine Gasoil MGO (DMA).
Fluido e scorrevoleDenso e pesante

Fluido Leggero e scorrevole. Le onde si propagano veloci e si smorzano lentamente.

Viscosità tipica dai dati2.0 to 6.0 mm2/s at 40 C

Velocità di agitazione
0 px/s
Movimento del liquido
0%
Si calma dopo
-
Superficie
Fermo

La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.

Aspetto

Clear and bright, pale yellow

Dove si usa

  • Auxiliary engines on all ships
  • Main engines of small vessels
  • Boilers and incinerators
  • ECA compliance fuel

Manipolazione e sicurezza

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

Proprietà tipiche

Aspetto
Clear and bright, pale yellow
Densità a 15 °C
800 to 890 kg/m³
Intervallo di ebollizione
170 to 380 °C
Punto di infiammabilità
Min 60 C (ISO 8217)
Viscosità
2.0 to 6.0 mm2/s at 40 C
Punto di scorrimento
Winter max 0 C; summer max 6 C (ISO 8217)
Zolfo tipico
Max 1.0% historically; typically below 0.10% for LSMGO

◉What it is

Marine gasoil is a distillate fuel supplied to ships under the ISO 8217 grade DMA. It has no residual oil, so it is cleaner and easier to handle than heavy fuel and does not need heating in most climates. Ships use it in auxiliary engines, in smaller main engines, for boiler lighting and when entering emission control areas. The standard limits sulphur through MARPOL, which is 0.50 percent in global waters and 0.10 percent in ECAs. DMA has a maximum viscosity of 6 mm2/s at 40 C and maximum density of 890 kg/m3 at 15 C.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛La chimica

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Distilled from crude in the CDU and hydrotreated; may be blended with cracked gasoil and kerosene components.

▶How it works

Burns in diesel engines without heating. Low viscosity requires cooling the fuel at the injectors to keep the viscosity above minimum for lubrication.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Fujairah is one of the world's largest bunkering hubs and supplies MGO to ships passing the Strait of Hormuz. No emission control area covers the Gulf (the ECAs are the Baltic Sea, North Sea, North America, the US Caribbean and the Mediterranean), but ships may buy MGO for ECA calls elsewhere. Current volumes are not stated.

Molecole chiave

Norme e specifiche

ISO 8217Marine fuels standard; DMA grade: viscosity 2.0 to 6.0 mm2/s at 40 C, density 890 kg/m3 max, flash point 60 C min.
MARPOL Annex VI0.50% global and 0.10% ECA sulphur limits (IMO).
ISO 4259Precision of test methods and use of precision data.

Pericoli

UN1202 (diesel fuel or gas oil)Classe Class 3 flammable liquid, packing group III (when shipped as dangerous goods)

SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

Come si commercializza

Units

Metric tonnes

Benchmarks

Platts MGO assessments at Fujairah, Singapore, Rotterdam and other ports; ICE Gasoil futures as reference

Typical cargo

Barge deliveries of 100 to 2,000 mt; bulk cargoes by MR tanker

Incoterms

FOB barge at the port or delivered ex-wharf; ships purchase on a DAP basis at anchorage.

Notes

Sold per mt with a BDN (bunker delivery note) and MARPOL sample.

Raffinerie che lo producono: i nostri suggerimenti

152 raffinerie censite producono questo prodotto, 42 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.

Vedere tutti i 152 sulla mappa

Terminal che lo movimentano

Lo sapeva?

💡 MGO is the cleanest standard marine fuel and a distillate similar to No. 2 diesel.

💡 DMA is limited to 6.0 mm2/s at 40 C, while the residual grade RMG 380 is limited to 380 mm2/s at 50 C.

Si metta alla prova su Marine Gasoil MGO (DMA)

Domanda 1 di 3 · Punteggio 0 · Serie 0

What is the max viscosity of DMA at 40 C?

Altro in questo gruppo

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.