Passare al contenuto

Middle distillates

Diesel EN 590 (10 ppm)

EN 590 is the European specification for road diesel, limited to 10 mg/kg of sulphur. It is the most widely traded clean diesel grade outside North America.

← Tutti i prodottiDetto anche: EN 590 diesel, Euro diesel, ULSD 10 ppm, Gasoil 10 ppm

  • Punto di infiammabilitàAbove 55 C (EN 590 minimum)
  • Densità820 to 845 kg/m³
  • Viscosità2.0 to 4.5 mm2/s at 40 C
  • Flusso a freddoSet by climate class. Temperate classes A to F have a maximum CFPP from +5 to minus 20 C; arctic classes 0 to 4 run from minus 20 to minus 44 C.
  • ZolfoMax 10 mg/kg (10 ppm)
  • Intervallo di ebollizione170 to 360 °C
Colore tipico, vetro da laboratorio
Campione in vetro da laboratorio di Diesel EN 590 (10 ppm), nel suo colore tipico
Un campione di Diesel EN 590 (10 ppm) in vetro da laboratorio su sfondo scuro da studio, per valutare facilmente il colore.
Fotografia di riferimento
Come Diesel EN 590 (10 ppm) viene stoccato e movimentato nella pratica.

Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0. Fotografia: realizzata da una foto di riferimento di DanTD, CC BY-SA 3.0, tramite Wikimedia Commons.

Agitate il liquido per sentire quanto è denso

Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.

Fluido
Il colore segue il colore tipico di Diesel EN 590 (10 ppm).
Fluido e scorrevoleDenso e pesante

Fluido Leggero e scorrevole. Le onde si propagano veloci e si smorzano lentamente.

Viscosità tipica dai dati2.0 to 4.5 mm2/s at 40 C

Velocità di agitazione
0 px/s
Movimento del liquido
0%
Si calma dopo
-
Superficie
Fermo

La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.

Aspetto

Clear to pale yellow liquid, bright and free of visible water

Dove si usa

  • Cars, vans, trucks and buses
  • Rail locomotives and light marine engines
  • Generators and construction machinery
  • Blending base for biodiesel and HVO blends

Manipolazione e sicurezza

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

Proprietà tipiche

Aspetto
Clear to pale yellow liquid, bright and free of visible water
Densità a 15 °C
820 to 845 kg/m³
Intervallo di ebollizione
170 to 360 °C
Punto di infiammabilità
Above 55 C (EN 590 minimum)
Viscosità
2.0 to 4.5 mm2/s at 40 C
Punto di scorrimento
Set by climate class. Temperate classes A to F have a maximum CFPP from +5 to minus 20 C; arctic classes 0 to 4 run from minus 20 to minus 44 C.
Zolfo tipico
Max 10 mg/kg (10 ppm)

◉What it is

EN 590 diesel is the standard automotive diesel in the European Union and is also referenced by many importing countries outside Europe. The standard sets limits for sulphur, cetane number, density, distillation, flash point, cold flow and lubricity. Its sulphur limit of 10 ppm matches Euro 5 and later vehicle standards and allows modern exhaust filters to work. The fuel may contain up to 7 percent by volume of fatty acid methyl ester (FAME) biodiesel. It is made mainly by hydrotreating middle distillate streams from crude distillation and cracking units.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛La chimica

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Crude oil is split in the atmospheric distillation unit (CDU). Straight-run gasoil, together with light cycle oil from FCC units and gasoil from hydrocrackers or cokers, is sent to a hydrotreater that uses hydrogen over a cobalt-molybdenum or nickel-molybdenum catalyst to remove sulphur and nitrogen. Cetane improvers, lubricity additives and cold-flow improvers are added in the blending stage.

▶How it works

In a diesel engine the fuel is injected into hot compressed air and ignites without a spark. Cetane number (minimum 51 in EN 590) measures ignition quality: a higher number means shorter ignition delay and smoother combustion. Low sulphur removes the sulphur dioxide that would poison catalysts and filters, but severe hydrotreating also removes natural lubricating compounds, so lubricity additives are added.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Gulf refineries export diesel to East Africa, Pakistan and Europe, and Fujairah and Jebel Ali are major storage and trading points. Wikipedia reports about 10 million cubic metres of refined-product storage at Fujairah. The sulphur grades of Gulf domestic road diesel are not stated.

Molecole chiave

Norme e specifiche

EN 590European road diesel specification: sulphur 10 mg/kg max, cetane number 51 min, density 820 to 845 kg/m3, up to 7% v/v FAME.
EN 14214Quality standard for the FAME biodiesel allowed as a blend component
ASTM D975US counterpart; not interchangeable with EN 590 limits

Pericoli

UN1202Classe Class 3 flammable liquid, packing group III (ADR/IMDG)

Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

Come si commercializza

Units

Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.

Benchmarks

Platts and Argus assessments for ULSD 10 ppm in Northwest Europe and the Mediterranean; ICE Low Sulphur Gasoil futures (a 10 ppm contract) as the paper benchmark

Typical cargo

Commonly 30,000 to 37,000 mt on a Medium Range tanker or 5,000 to 10,000 mt barges for coastal trades

Incoterms

FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.

Notes

Quality is verified by independent surveyors against the EN 590 certificate of analysis at load port.

Raffinerie che lo producono: i nostri suggerimenti

152 raffinerie censite producono questo prodotto, 42 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.

Vedere tutti i 152 sulla mappa

Terminal che lo movimentano

Lo sapeva?

💡 Cetane number minimum was 49 for Euro 1 and 2 diesel and rose to 51 for Euro 3 to 5 (Wikipedia).

💡 The sulphur limit fell from 0.2 percent (2,000 ppm) at Euro 1 to 10 mg/kg from 2009, a cut of 99.5 percent.

Si metta alla prova su Diesel EN 590 (10 ppm)

Domanda 1 di 3 · Punteggio 0 · Serie 0

What is the maximum sulphur content in EN 590 diesel?

Altro in questo gruppo

Fonti

Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.

Diesel EN 590 (10 ppm): chemistry, properties and trade | PST