Middle distillates
Biodiesel Blends (FAME, B7 to B20)
Biodiesel is a diesel substitute made from fats and oils reacted with methanol to give fatty acid methyl esters (FAME). It is blended with petroleum diesel at levels such as B7 or B20.
← Tutti i prodottiDetto anche: FAME, B7, B20, Fatty acid methyl ester
- Punto di infiammabilitàAbove 101 C for pure FAME (EN 14214)
- Densità860 to 900 kg/m³
- Viscosità3.5 to 5.0 mm2/s at 40 C (EN 14214)
- Flusso a freddoVaries widely with feedstock; cloud point can be above 0 C
- ZolfoMax 10 mg/kg
- Intervallo di ebollizione330 to 360 °C


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0. Fotografia: realizzata da una foto di riferimento di DanTD, CC BY-SA 3.0, tramite Wikimedia Commons.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Fluido Leggero e scorrevole. Le onde si propagano veloci e si smorzano lentamente.
Viscosità tipica dai dati3.5 to 5.0 mm2/s at 40 C (EN 14214)
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Clear amber to yellow
Dove si usa
- Blend component in road diesel
- Fleet fuel (B20)
- Marine biofuel blends
- Off-grid power generation
Manipolazione e sicurezza
- Keep tanks dry and clean; use within 6 months where possible; add antioxidant if needed. Heat tanks in cold climates to avoid gelling. Sample and test for oxidation stability and water.
- B100 is combustible and biodegradable and can degrade some seals and filters.
Proprietà tipiche
- Aspetto
- Clear amber to yellow
- Densità a 15 °C
- 860 to 900 kg/m³
- Intervallo di ebollizione
- 330 to 360 °C
- Punto di infiammabilità
- Above 101 C for pure FAME (EN 14214)
- Viscosità
- 3.5 to 5.0 mm2/s at 40 C (EN 14214)
- Punto di scorrimento
- Varies widely with feedstock; cloud point can be above 0 C
- Zolfo tipico
- Max 10 mg/kg
◉What it is
Biodiesel is a renewable fuel produced by reacting vegetable oils, used cooking oil or animal fats with methanol. The product is a mixture of fatty acid methyl esters called FAME. Blends are named by percentage, for example B7 contains 7 percent biodiesel and 93 percent petroleum diesel. EN 590 allows up to 7 percent FAME. Higher blends such as B20 are used in fleets and some countries. FAME has slightly lower energy content than diesel and can have poorer cold flow and storage stability.
⬡What it is made of
Fatty acid methyl esters, typically C16 to C18 chains, with some saturated and unsaturated esters.
⚛La chimica
A FAME molecule is R-COO-CH3, where R is a long hydrocarbon chain derived from a fatty acid. The oxygen in the ester group means FAME has lower energy per kilogram but burns cleanly and has good lubricity. Saturated chains (such as palmitate) give high cetane but poor cold flow; unsaturated chains (such as oleate) improve cold flow but oxidise more easily.
⚙How it is made
Transesterification: vegetable oil or fat reacts with methanol in the presence of a catalyst (such as sodium methoxide) to give FAME and glycerol. About 100 kg of glycerol is produced per tonne of biodiesel (Wikipedia). The FAME is washed and dried, then blended at terminals.
▶How it works
FAME has cetane similar to or higher than diesel and good lubricity. It can attract water, grow microbes and oxidise during storage. Blends up to B20 are usually fine in standard diesel engines, though some manufacturers limit allowed blend levels.
▣Storage, loading and inspection
Keep tanks dry and clean; use within 6 months where possible; add antioxidant if needed. Heat tanks in cold climates to avoid gelling. Sample and test for oxidation stability and water.
★Why it matters in the Gulf
Regional FAME use is small compared with Europe, and trading hubs may handle biofuel blends. UAE biodiesel production details are not stated.
Molecole chiave
Norme e specifiche
| EN 14214 | European FAME biodiesel quality standard |
|---|---|
| ASTM D6751 | US B100 standard |
| ASTM D7467 | US B6 to B20 blend standard |
| EN 590 | Allows up to 7% v/v FAME in diesel |
Pericoli
B100 is combustible and biodegradable and can degrade some seals and filters.
Come si commercializza
Units
Metric tonnes and cubic metres
Benchmarks
Platts and Argus FAME assessments (for example FAME 0 and RME)
Typical cargo
Parcels of 1,000 to 30,000 mt
Incoterms
FOB, CIF, DAP
Notes
Prices follow vegetable oil, used cooking oil and tax or mandate rules.
Raffinerie che lo producono: i nostri suggerimenti
152 raffinerie censite producono questo prodotto, 42 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAccesso all'esportazione
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingAccesso all'esportazione
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAccesso all'esportazione
Vedere tutti i 152 sulla mappa
Terminal che lo movimentano
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Lo sapeva?
💡 About 100 kg of glycerol is produced per tonne of biodiesel (Wikipedia).
💡 Rudolf Diesel's engine ran on peanut oil at the 1900 Paris Exposition (Wikipedia).
Si metta alla prova su Biodiesel Blends (FAME, B7 to B20)
What is B7?
Altro in questo gruppo
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.







