Middle distillates
Marine Diesel DMB
DMB is an ISO 8217 distillate marine fuel that may contain traces of residual oil. It has a higher allowed viscosity and density than DMA.
← Tutti i prodottiDetto anche: DMB, Marine diesel oil (MDO), Marine diesel
- Punto di infiammabilitàMin 60 C
- Densità800 to 900 kg/m³
- ViscositàMax 11.0 mm2/s at 40 C
- Flusso a freddoWinter max 0 C; summer max 6 C (ISO 8217)
- ZolfoMax 0.50% globally under MARPOL; 0.10% in ECAs where used
- Intervallo di ebollizione170 to 400 °C


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0. Fotografia: realizzata da una foto di riferimento di Грищук ЮН, CC BY-SA 3.0, tramite Wikimedia Commons.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Fluido Leggero e scorrevole. Le onde si propagano veloci e si smorzano lentamente.
Viscosità tipica dai datiMax 11.0 mm2/s at 40 C
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Dark to clear; may be hazy
Dove si usa
- Ships with older medium-speed engines
- Auxiliary engines and boilers
- Tugs and fishing vessels
Manipolazione e sicurezza
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Marine fuel flash point min 60 C.
Proprietà tipiche
- Aspetto
- Dark to clear; may be hazy
- Densità a 15 °C
- 800 to 900 kg/m³
- Intervallo di ebollizione
- 170 to 400 °C
- Punto di infiammabilità
- Min 60 C
- Viscosità
- Max 11.0 mm2/s at 40 C
- Punto di scorrimento
- Winter max 0 C; summer max 6 C (ISO 8217)
- Zolfo tipico
- Max 0.50% globally under MARPOL; 0.10% in ECAs where used
◉What it is
DMB is the second distillate grade in the ISO 8217 marine fuel standard. It is often called marine diesel oil (MDO). Unlike DMA, it is allowed to contain a small amount of residual material because it can be contaminated by residual oil in the supply chain. It is generally cloudy and slightly darker than DMA. It is mainly used by ships with older engines that tolerate a higher viscosity limit of 11 mm2/s at 40 C and by ships that do not need to burn the cleanest grade.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛La chimica
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Distilled gasoil blended with small amounts of heavier gasoil or cutter streams.
▶How it works
Burns in diesel engines, sometimes requires slight heating in cold climates. Higher viscosity and density than DMA make it cheaper.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Distillate grades are available at Fujairah, but DMB-specific availability is not stated.
Molecole chiave
Norme e specifiche
| ISO 8217 | DMB limits: viscosity 11.0 mm2/s max at 40 C, density 900 kg/m3 max, flash point 60 C min. |
|---|---|
| MARPOL Annex VI | Sulphur limits (0.50% global, 0.10% in ECAs). |
Pericoli
Marine fuel flash point min 60 C.
Come si commercializza
Units
Metric tonnes
Benchmarks
Platts MGO-based assessments with a small discount to DMA
Typical cargo
Barge or tanker deliveries
Incoterms
As MGO
Notes
DMB trades less than DMA because the DMA grade has become the standard.
Raffinerie che lo producono: i nostri suggerimenti
152 raffinerie censite producono questo prodotto, 42 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAccesso all'esportazione
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingAccesso all'esportazione
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAccesso all'esportazione
Vedere tutti i 152 sulla mappa
Terminal che lo movimentano
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Lo sapeva?
💡 DMB is sometimes simply called MDO.
💡 DMB is allowed a higher viscosity (11.0 mm2/s) than DMA (6.0 mm2/s).
Si metta alla prova su Marine Diesel DMB
What is the max viscosity of DMB at 40 C?
Altro in questo gruppo
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Fonti
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Fujairah (Wikipedia)
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.







