Middle distillates
Jet A-1
Jet A-1 is the standard kerosene-type fuel for civil aircraft turbines worldwide outside the United States. It has a freezing point of minus 47 C and a flash point of at least 38 C.
← Tutti i prodottiDetto anche: Jet fuel, Aviation turbine fuel, ATF, Kerosene (jet)
- Punto di infiammabilità38 °C
- Densità775 to 840 kg/m³
- ViscositàMax 8.0 mm2/s at minus 20 C (typical limit in the specification)
- Flusso a freddoFreezing point max minus 47 C
- ZolfoUp to 0.30 % m/m (specification limit); typically much lower
- Intervallo di ebollizione145 to 300 °C


Crediti delle immagini I campioni in vetro da laboratorio sono realizzati da foto di riferimento su Wikimedia Commons di Chemik10 (CC BY-SA 2.5) e una foto di un campione di petrolio CC0.
Agitate il liquido per sentire quanto è denso
Muovete il mouse o un dito sul liquido. Premete e trascinate per agitare più forte. Tastiera: le frecce agitano, Spazio scuote.
Fluido Leggero e scorrevole. Le onde si propagano veloci e si smorzano lentamente.
Viscosità tipica dai datiMax 8.0 mm2/s at minus 20 C (typical limit in the specification)
- Velocità di agitazione
- 0 px/s
- Movimento del liquido
- 0%
- Si calma dopo
- -
- Superficie
- Fermo
La classe è solo una guida alla sensazione. Il valore di viscosità mostrato è quello dei dati di specifica.
Aspetto
Clear and bright, colourless to pale straw. Free of visible water, dirt and haze. Colour is measured on the Saybolt scale: +30 is water-white, and a fuel that has turned yellow or dark has usually been contaminated or has aged.
Dove si usa
- Commercial aviation turbine fuel
- Blending with sustainable aviation fuel (SAF)
Manipolazione e sicurezza
- Handled in dedicated clean systems with water separators and filters, joint inspection controls (JIG standards), and release certificates (Refinery Certificate of Quality).
- Flammable; static buildup in handling; antistatic additive used.
Proprietà tipiche
- Aspetto
- Clear, colourless to straw
- Densità a 15 °C
- 775 to 840 kg/m³
- Intervallo di ebollizione
- 145 to 300 °C
- Punto di infiammabilità
- 38 °C
- Viscosità
- Max 8.0 mm2/s at minus 20 C (typical limit in the specification)
- Punto di scorrimento
- Freezing point max minus 47 C
- Zolfo tipico
- Up to 0.30 % m/m (specification limit); typically much lower
◉What it is
Jet A-1 is a carefully controlled kerosene cut with a carbon range of about 8 to 16. It must meet tight limits for freezing point, flash point, thermal stability and cleanliness because it flows through aircraft fuel systems at altitude. It is made by distilling and treating crude oil, and may include approved additives such as antistatic additive, corrosion inhibitor and icing inhibitor. Jet A-1 contrasts with the US Jet A, which has a slightly higher freezing point of minus 40 C. Sustainable aviation fuel can be blended in up to approved limits.
⬡What it is made of
C8 to C16 paraffins, naphthenes and aromatics.
⚛La chimica
Kerosene molecules are medium-length alkanes and cycloalkanes with some aromatics. Straight chains of this length would freeze at low temperature, so the freezing point is controlled by composition. Aromatics help seals swell but form soot, so they are limited. Sulphur is limited to 0.30 percent mass by specification.
⚙How it is made
Straight-run kerosene from the crude distillation unit, treated by hydrotreating or Merox sweetening, with additives. Hydrocracker kerosene is also used.
▶How it works
A low freezing point keeps fuel flowing at altitude, the flash point ensures safe ground handling, and thermal stability prevents deposits in hot engine sections. Energy per kilogram is high at roughly 43 MJ/kg.
▣Storage, loading and inspection
Handled in dedicated clean systems with water separators and filters, joint inspection controls (JIG standards), and release certificates (Refinery Certificate of Quality).
★Why it matters in the Gulf
The Gulf is a major jet fuel hub, with supply from regional refineries and storage at Fujairah. Wikipedia reports about 10 million cubic metres of refined-product storage in the Fujairah oil industry zone. Verified jet fuel volumes were not retrieved.
Molecole chiave
Norme e specifiche
| DEF STAN 91-091 | UK Ministry of Defence specification for Jet A-1. |
|---|---|
| ASTM D1655 | Standard specification for aviation turbine fuels (Jet A and Jet A-1). |
| IATA Guidance Material (Kerosene Type) | Industry guidance for aviation fuel quality. |
Pericoli
Flammable; static buildup in handling; antistatic additive used.
Come si commercializza
Units
Barrels or metric tonnes
Benchmarks
Platts Jet Kero FOB Arab Gulf, Singapore, NWE
Typical cargo
LR1 or MR tankers 35,000 to 75,000 tonnes
Incoterms
FOB, CFR, DAP at airport
Notes
Release certificate and fuel quality must match DEF STAN 91-091 or ASTM D1655.
Raffinerie che lo producono: i nostri suggerimenti
76 raffinerie censite producono questo prodotto, 26 delle quali nel Golfo, in Iran e in Iraq. Diamo la precedenza agli impianti del Golfo, poi a quelli in esercizio, poi a quelli per capacità.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAccesso all'esportazione
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAccesso all'esportazione
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAccesso all'esportazione
- 5Petro Rabigh Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAccesso all'esportazione
- 6Bapco Sitra Refinery
Bahrain · 380,000 bpdGulf locationOperatingAccesso all'esportazione
Terminal che lo movimentano
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- VTTI Fujairah
United Arab Emirates
- Al-Zour refinery tank farm and export facilities
Kuwait
- Brooge Petroleum and Gas Investment (Fujairah Oil Industry Zone)
United Arab Emirates
Lo sapeva?
💡 Jet A-1 has a freezing point of minus 47 C, while US Jet A is minus 40 C.
💡 Jet A-1 requires an antistatic additive; Jet A does not (Wikipedia).
Si metta alla prova su Jet A-1
Jet A-1 maximum freezing point is:
Vedere la pagina delle specifiche PST
Altro in questo gruppo
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Fonti
Redatto con parole proprie di PST a partire dalle fonti sopra. Affidabilità dei dati: medium. I valori tipici variano in base all'origine e al contratto, quindi legga sempre la specifica nel Suo contratto.






