Ir para o conteúdo

Middle distillates

Biodiesel Blends (FAME, B7 to B20)

Biodiesel is a diesel substitute made from fats and oils reacted with methanol to give fatty acid methyl esters (FAME). It is blended with petroleum diesel at levels such as B7 or B20.

← Todos os produtosTambém chamado de: FAME, B7, B20, Fatty acid methyl ester

  • Ponto de fulgorAbove 101 C for pure FAME (EN 14214)
  • Densidade860 to 900 kg/m³
  • Viscosidade3.5 to 5.0 mm2/s at 40 C (EN 14214)
  • Fluidez a frioVaries widely with feedstock; cloud point can be above 0 C
  • EnxofreMax 10 mg/kg
  • Faixa de ebulição330 to 360 °C
Cor típica, vidro de laboratório
Amostra de Biodiesel Blends (FAME, B7 to B20) em vidro de laboratório, na cor típica
Uma amostra de Biodiesel Blends (FAME, B7 to B20) em vidro de laboratório sobre fundo escuro de estúdio, para facilitar a avaliação da cor.
Fotografia de referência
Como Biodiesel Blends (FAME, B7 to B20) é armazenado e movimentado na prática.

Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0. Fotografia: feita a partir de uma fotografia de referência de DanTD, CC BY-SA 3.0, via Wikimedia Commons.

Agite o líquido para sentir a sua espessura

Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.

Fino
A cor segue a cor típica de Biodiesel Blends (FAME, B7 to B20).
Fino e soltoEspesso e pesado

Fino Leve e fluido. As ondas deslocam-se depressa e desvanecem-se devagar.

Viscosidade típica segundo os dados3.5 to 5.0 mm2/s at 40 C (EN 14214)

Velocidade de agitação
0 px/s
Movimento do líquido
0%
Assentou após
-
Superfície
Parado

A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.

Aspecto esperado

Clear amber to yellow

Onde é usado

  • Blend component in road diesel
  • Fleet fuel (B20)
  • Marine biofuel blends
  • Off-grid power generation

Manuseamento e segurança

  • Keep tanks dry and clean; use within 6 months where possible; add antioxidant if needed. Heat tanks in cold climates to avoid gelling. Sample and test for oxidation stability and water.
  • B100 is combustible and biodegradable and can degrade some seals and filters.

Propriedades típicas

Aparência
Clear amber to yellow
Densidade a 15 °C
860 to 900 kg/m³
Faixa de ebulição
330 to 360 °C
Ponto de fulgor
Above 101 C for pure FAME (EN 14214)
Viscosidade
3.5 to 5.0 mm2/s at 40 C (EN 14214)
Ponto de fluidez
Varies widely with feedstock; cloud point can be above 0 C
Enxofre típico
Max 10 mg/kg

◉What it is

Biodiesel is a renewable fuel produced by reacting vegetable oils, used cooking oil or animal fats with methanol. The product is a mixture of fatty acid methyl esters called FAME. Blends are named by percentage, for example B7 contains 7 percent biodiesel and 93 percent petroleum diesel. EN 590 allows up to 7 percent FAME. Higher blends such as B20 are used in fleets and some countries. FAME has slightly lower energy content than diesel and can have poorer cold flow and storage stability.

⬡What it is made of

Fatty acid methyl esters, typically C16 to C18 chains, with some saturated and unsaturated esters.

⚛A química

A FAME molecule is R-COO-CH3, where R is a long hydrocarbon chain derived from a fatty acid. The oxygen in the ester group means FAME has lower energy per kilogram but burns cleanly and has good lubricity. Saturated chains (such as palmitate) give high cetane but poor cold flow; unsaturated chains (such as oleate) improve cold flow but oxidise more easily.

⚙How it is made

Transesterification: vegetable oil or fat reacts with methanol in the presence of a catalyst (such as sodium methoxide) to give FAME and glycerol. About 100 kg of glycerol is produced per tonne of biodiesel (Wikipedia). The FAME is washed and dried, then blended at terminals.

▶How it works

FAME has cetane similar to or higher than diesel and good lubricity. It can attract water, grow microbes and oxidise during storage. Blends up to B20 are usually fine in standard diesel engines, though some manufacturers limit allowed blend levels.

▣Storage, loading and inspection

Keep tanks dry and clean; use within 6 months where possible; add antioxidant if needed. Heat tanks in cold climates to avoid gelling. Sample and test for oxidation stability and water.

★Why it matters in the Gulf

Regional FAME use is small compared with Europe, and trading hubs may handle biofuel blends. UAE biodiesel production details are not stated.

Moléculas principais

Normas e especificações

EN 14214European FAME biodiesel quality standard
ASTM D6751US B100 standard
ASTM D7467US B6 to B20 blend standard
EN 590Allows up to 7% v/v FAME in diesel

Riscos

Pure FAME is not generally regulated for transport; diesel blends use UN1202Classe Class 3 for blends with diesel

B100 is combustible and biodegradable and can degrade some seals and filters.

Como é negociado

Units

Metric tonnes and cubic metres

Benchmarks

Platts and Argus FAME assessments (for example FAME 0 and RME)

Typical cargo

Parcels of 1,000 to 30,000 mt

Incoterms

FOB, CIF, DAP

Notes

Prices follow vegetable oil, used cooking oil and tax or mandate rules.

Refinarias que o produzem: nossas sugestões

152 refinarias listadas produzem este produto, 42 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.

Ver todos os 152 no mapa

Terminais que o movimentam

Você sabia

💡 About 100 kg of glycerol is produced per tonne of biodiesel (Wikipedia).

💡 Rudolf Diesel's engine ran on peanut oil at the 1900 Paris Exposition (Wikipedia).

Teste seus conhecimentos sobre Biodiesel Blends (FAME, B7 to B20)

Pergunta 1 de 3 · Pontuação 0 · Sequência 0

What is B7?

Mais neste grupo

Fontes

Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.