Middle distillates
Heating Oil
Heating oil is a light distillate similar to diesel that is burned in boilers and furnaces. It is often dyed or marked for tax reasons.
← Todos os produtosTambém chamado de: Home heating oil, Fuel oil No. 2, Gasoil for heating, Domestic heating oil
- Ponto de fulgorAbove 38 C (ASTM D396 No. 2 minimum 38 C); 55 C in many European specifications
- Densidade820 to 870 kg/m³
- Viscosidade1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
- Fluidez a frioTypically below -6 C for grade 2
- EnxofreVaries from 10 ppm to 0.1% depending on market
- Faixa de ebulição170 to 390 °C


Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0. Fotografia: feita a partir de uma fotografia de referência de DanTD, CC BY-SA 3.0, via Wikimedia Commons.
Agite o líquido para sentir a sua espessura
Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.
Fino Leve e fluido. As ondas deslocam-se depressa e desvanecem-se devagar.
Viscosidade típica segundo os dados1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
- Velocidade de agitação
- 0 px/s
- Movimento do líquido
- 0%
- Assentou após
- -
- Superfície
- Parado
A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.
Aspecto esperado
Pale yellow to red or blue when dyed
Onde é usado
- Home and building heating
- Industrial boilers and dryers
- Backup generators
- Blending stock for diesel in some markets
Manuseamento e segurança
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Propriedades típicas
- Aparência
- Pale yellow to red or blue when dyed
- Densidade a 15 °C
- 820 to 870 kg/m³
- Faixa de ebulição
- 170 to 390 °C
- Ponto de fulgor
- Above 38 C (ASTM D396 No. 2 minimum 38 C); 55 C in many European specifications
- Viscosidade
- 1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
- Ponto de fluidez
- Typically below -6 C for grade 2
- Enxofre típico
- Varies from 10 ppm to 0.1% depending on market
◉What it is
Heating oil is a low-viscosity fuel used for space heating in homes and commercial buildings. In North America it is called No. 2 fuel oil and is chemically almost identical to diesel, but it is taxed less and marked with dye or chemical tracers. In Europe it is often a gasoil with higher allowed sulphur or a lower cost specification. Heating oil burns in pressure-jet burners after atomisation. Because it is stored in outdoor or basement tanks, cold-flow quality and stability during long storage matter.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛A química
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Taken from the middle distillate cut of the CDU and treated in hydrotreaters to the required sulphur level. Cheaper marker dyes and tracers are added where tax rules require.
▶How it works
Atomised oil mixes with air and burns, releasing about 38 MJ per litre. Sulphur determines the amount of SO2 in flue gas. Wax crystals can block filters in cold weather, so winter grades are blended with kerosene or additives.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Heating demand in the GCC is minimal. Heating oil specifications appear mainly in export trades and in storage at Fujairah. Central Asia, a priority region for PST, uses heating oil and similar grades seasonally.
Moléculas principais
Normas e especificações
| ASTM D396 | US standard for fuel oils, including No. 1 and No. 2 grades. |
|---|---|
| BS 2869 Class C2 | UK domestic heating oil (kerosene type). |
| National heating gasoil standards | European heating gasoil rules vary by country, for example DIN 51603-1 in Germany. |
Riscos
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Como é negociado
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage. In US trading, gallons and ULSD heating oil (NYMEX contract).
Benchmarks
NY Harbor heating oil and ULSD futures historically; Platts gasoil assessments in Europe and the Gulf
Typical cargo
Barge or tanker parcels from 2,000 to 30,000 mt
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Often traded together with diesel and taxed differently by country.
Refinarias que o produzem: nossas sugestões
152 refinarias listadas produzem este produto, 42 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcesso de exportação
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcesso de exportação
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingAcesso de exportação
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcesso de exportação
Terminais que o movimentam
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Você sabia
💡 Heating oil is dyed in many countries so authorities can detect illegal use in road vehicles.
💡 No. 2 heating oil is chemically very similar to diesel but is taxed less.
Teste seus conhecimentos sobre Heating Oil
In the US, heating oil is usually called which grade?
Mais neste grupo
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Fontes
Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.






