Middle distillates
Marine Diesel DMB
DMB is an ISO 8217 distillate marine fuel that may contain traces of residual oil. It has a higher allowed viscosity and density than DMA.
← Todos os produtosTambém chamado de: DMB, Marine diesel oil (MDO), Marine diesel
- Ponto de fulgorMin 60 C
- Densidade800 to 900 kg/m³
- ViscosidadeMax 11.0 mm2/s at 40 C
- Fluidez a frioWinter max 0 C; summer max 6 C (ISO 8217)
- EnxofreMax 0.50% globally under MARPOL; 0.10% in ECAs where used
- Faixa de ebulição170 to 400 °C


Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0. Fotografia: feita a partir de uma fotografia de referência de Грищук ЮН, CC BY-SA 3.0, via Wikimedia Commons.
Agite o líquido para sentir a sua espessura
Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.
Fino Leve e fluido. As ondas deslocam-se depressa e desvanecem-se devagar.
Viscosidade típica segundo os dadosMax 11.0 mm2/s at 40 C
- Velocidade de agitação
- 0 px/s
- Movimento do líquido
- 0%
- Assentou após
- -
- Superfície
- Parado
A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.
Aspecto esperado
Dark to clear; may be hazy
Onde é usado
- Ships with older medium-speed engines
- Auxiliary engines and boilers
- Tugs and fishing vessels
Manuseamento e segurança
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Marine fuel flash point min 60 C.
Propriedades típicas
- Aparência
- Dark to clear; may be hazy
- Densidade a 15 °C
- 800 to 900 kg/m³
- Faixa de ebulição
- 170 to 400 °C
- Ponto de fulgor
- Min 60 C
- Viscosidade
- Max 11.0 mm2/s at 40 C
- Ponto de fluidez
- Winter max 0 C; summer max 6 C (ISO 8217)
- Enxofre típico
- Max 0.50% globally under MARPOL; 0.10% in ECAs where used
◉What it is
DMB is the second distillate grade in the ISO 8217 marine fuel standard. It is often called marine diesel oil (MDO). Unlike DMA, it is allowed to contain a small amount of residual material because it can be contaminated by residual oil in the supply chain. It is generally cloudy and slightly darker than DMA. It is mainly used by ships with older engines that tolerate a higher viscosity limit of 11 mm2/s at 40 C and by ships that do not need to burn the cleanest grade.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛A química
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Distilled gasoil blended with small amounts of heavier gasoil or cutter streams.
▶How it works
Burns in diesel engines, sometimes requires slight heating in cold climates. Higher viscosity and density than DMA make it cheaper.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Distillate grades are available at Fujairah, but DMB-specific availability is not stated.
Moléculas principais
Normas e especificações
| ISO 8217 | DMB limits: viscosity 11.0 mm2/s max at 40 C, density 900 kg/m3 max, flash point 60 C min. |
|---|---|
| MARPOL Annex VI | Sulphur limits (0.50% global, 0.10% in ECAs). |
Riscos
Marine fuel flash point min 60 C.
Como é negociado
Units
Metric tonnes
Benchmarks
Platts MGO-based assessments with a small discount to DMA
Typical cargo
Barge or tanker deliveries
Incoterms
As MGO
Notes
DMB trades less than DMA because the DMA grade has become the standard.
Refinarias que o produzem: nossas sugestões
152 refinarias listadas produzem este produto, 42 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcesso de exportação
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcesso de exportação
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingAcesso de exportação
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcesso de exportação
Terminais que o movimentam
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Você sabia
💡 DMB is sometimes simply called MDO.
💡 DMB is allowed a higher viscosity (11.0 mm2/s) than DMA (6.0 mm2/s).
Teste seus conhecimentos sobre Marine Diesel DMB
What is the max viscosity of DMB at 40 C?
Mais neste grupo
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Fontes
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Fujairah (Wikipedia)
Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.







