Ir para o conteúdo

Middle distillates

Diesel EN 590 (10 ppm)

EN 590 is the European specification for road diesel, limited to 10 mg/kg of sulphur. It is the most widely traded clean diesel grade outside North America.

← Todos os produtosTambém chamado de: EN 590 diesel, Euro diesel, ULSD 10 ppm, Gasoil 10 ppm

  • Ponto de fulgorAbove 55 C (EN 590 minimum)
  • Densidade820 to 845 kg/m³
  • Viscosidade2.0 to 4.5 mm2/s at 40 C
  • Fluidez a frioSet by climate class. Temperate classes A to F have a maximum CFPP from +5 to minus 20 C; arctic classes 0 to 4 run from minus 20 to minus 44 C.
  • EnxofreMax 10 mg/kg (10 ppm)
  • Faixa de ebulição170 to 360 °C
Cor típica, vidro de laboratório
Amostra de Diesel EN 590 (10 ppm) em vidro de laboratório, na cor típica
Uma amostra de Diesel EN 590 (10 ppm) em vidro de laboratório sobre fundo escuro de estúdio, para facilitar a avaliação da cor.
Fotografia de referência
Como Diesel EN 590 (10 ppm) é armazenado e movimentado na prática.

Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0. Fotografia: feita a partir de uma fotografia de referência de DanTD, CC BY-SA 3.0, via Wikimedia Commons.

Agite o líquido para sentir a sua espessura

Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.

Fino
A cor segue a cor típica de Diesel EN 590 (10 ppm).
Fino e soltoEspesso e pesado

Fino Leve e fluido. As ondas deslocam-se depressa e desvanecem-se devagar.

Viscosidade típica segundo os dados2.0 to 4.5 mm2/s at 40 C

Velocidade de agitação
0 px/s
Movimento do líquido
0%
Assentou após
-
Superfície
Parado

A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.

Aspecto esperado

Clear to pale yellow liquid, bright and free of visible water

Onde é usado

  • Cars, vans, trucks and buses
  • Rail locomotives and light marine engines
  • Generators and construction machinery
  • Blending base for biodiesel and HVO blends

Manuseamento e segurança

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

Propriedades típicas

Aparência
Clear to pale yellow liquid, bright and free of visible water
Densidade a 15 °C
820 to 845 kg/m³
Faixa de ebulição
170 to 360 °C
Ponto de fulgor
Above 55 C (EN 590 minimum)
Viscosidade
2.0 to 4.5 mm2/s at 40 C
Ponto de fluidez
Set by climate class. Temperate classes A to F have a maximum CFPP from +5 to minus 20 C; arctic classes 0 to 4 run from minus 20 to minus 44 C.
Enxofre típico
Max 10 mg/kg (10 ppm)

◉What it is

EN 590 diesel is the standard automotive diesel in the European Union and is also referenced by many importing countries outside Europe. The standard sets limits for sulphur, cetane number, density, distillation, flash point, cold flow and lubricity. Its sulphur limit of 10 ppm matches Euro 5 and later vehicle standards and allows modern exhaust filters to work. The fuel may contain up to 7 percent by volume of fatty acid methyl ester (FAME) biodiesel. It is made mainly by hydrotreating middle distillate streams from crude distillation and cracking units.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛A química

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Crude oil is split in the atmospheric distillation unit (CDU). Straight-run gasoil, together with light cycle oil from FCC units and gasoil from hydrocrackers or cokers, is sent to a hydrotreater that uses hydrogen over a cobalt-molybdenum or nickel-molybdenum catalyst to remove sulphur and nitrogen. Cetane improvers, lubricity additives and cold-flow improvers are added in the blending stage.

▶How it works

In a diesel engine the fuel is injected into hot compressed air and ignites without a spark. Cetane number (minimum 51 in EN 590) measures ignition quality: a higher number means shorter ignition delay and smoother combustion. Low sulphur removes the sulphur dioxide that would poison catalysts and filters, but severe hydrotreating also removes natural lubricating compounds, so lubricity additives are added.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Gulf refineries export diesel to East Africa, Pakistan and Europe, and Fujairah and Jebel Ali are major storage and trading points. Wikipedia reports about 10 million cubic metres of refined-product storage at Fujairah. The sulphur grades of Gulf domestic road diesel are not stated.

Moléculas principais

Normas e especificações

EN 590European road diesel specification: sulphur 10 mg/kg max, cetane number 51 min, density 820 to 845 kg/m3, up to 7% v/v FAME.
EN 14214Quality standard for the FAME biodiesel allowed as a blend component
ASTM D975US counterpart; not interchangeable with EN 590 limits

Riscos

UN1202Classe Class 3 flammable liquid, packing group III (ADR/IMDG)

Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.

Como é negociado

Units

Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.

Benchmarks

Platts and Argus assessments for ULSD 10 ppm in Northwest Europe and the Mediterranean; ICE Low Sulphur Gasoil futures (a 10 ppm contract) as the paper benchmark

Typical cargo

Commonly 30,000 to 37,000 mt on a Medium Range tanker or 5,000 to 10,000 mt barges for coastal trades

Incoterms

FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.

Notes

Quality is verified by independent surveyors against the EN 590 certificate of analysis at load port.

Refinarias que o produzem: nossas sugestões

152 refinarias listadas produzem este produto, 42 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.

Ver todos os 152 no mapa

Terminais que o movimentam

Você sabia

💡 Cetane number minimum was 49 for Euro 1 and 2 diesel and rose to 51 for Euro 3 to 5 (Wikipedia).

💡 The sulphur limit fell from 0.2 percent (2,000 ppm) at Euro 1 to 10 mg/kg from 2009, a cut of 99.5 percent.

Teste seus conhecimentos sobre Diesel EN 590 (10 ppm)

Pergunta 1 de 3 · Pontuação 0 · Sequência 0

What is the maximum sulphur content in EN 590 diesel?

Mais neste grupo

Fontes

Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.