Middle distillates
Gasoil 50 ppm
Gasoil 50 ppm is a middle distillate with sulphur limited to 50 ppm (0.005% m/m). It is a common export diesel grade for markets whose vehicle standards do not yet require 10 ppm.
← Todos os produtosTambém chamado de: Diesel 50 ppm, Euro 4 diesel, Gasoil 0.005% S
- Ponto de fulgorAbove 55 C typical (min 52 to 60 C depending on contract)
- Densidade820 to 860 kg/m³
- Viscosidade2.0 to 4.5 mm2/s at 40 C typical
- EnxofreMax 50 ppm (0.005% m/m)
- Faixa de ebulição170 to 375 °C
- PerigoUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)


Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0. Fotografia: feita a partir de uma fotografia de referência de DanTD, CC BY-SA 3.0, via Wikimedia Commons.
Agite o líquido para sentir a sua espessura
Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.
Fino Leve e fluido. As ondas deslocam-se depressa e desvanecem-se devagar.
Viscosidade típica segundo os dados2.0 to 4.5 mm2/s at 40 C typical
- Velocidade de agitação
- 0 px/s
- Movimento do líquido
- 0%
- Assentou após
- -
- Superfície
- Parado
A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.
Aspecto esperado
Clear to pale yellow, may be dyed by local rule
Onde é usado
- Road diesel in markets that still allow this sulphur level
- Power generation and industrial burners
- Mining and construction equipment
- Agricultural and fishing vessels
Manuseamento e segurança
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Propriedades típicas
- Aparência
- Clear to pale yellow, may be dyed by local rule
- Densidade a 15 °C
- 820 to 860 kg/m³
- Faixa de ebulição
- 170 to 375 °C
- Ponto de fulgor
- Above 55 C typical (min 52 to 60 C depending on contract)
- Viscosidade
- 2.0 to 4.5 mm2/s at 40 C typical
- Ponto de fluidez
- Varies by season
- Enxofre típico
- Max 50 ppm (0.005% m/m)
◉What it is
Gasoil 50 ppm is a diesel-range fuel that has been hydrotreated to a moderate sulphur level. It is sold to countries and industries that use it for road transport, power generation and machinery. The sulphur level matches Euro 4 era vehicle rules, so engines with advanced exhaust filters should not use it. It has the same basic boiling range and cetane behaviour as 10 ppm diesel but a higher sulphur content. Contracts often state the exact sulphur limit, density, cetane index, flash point and distillation requirements. Intermediate grade between 500 ppm and 10 ppm.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛A química
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Atmospheric distillation provides straight-run gasoil which is hydrotreated at less severity than 10 ppm production. Blending with other treated cuts adjusts density and cold flow.
▶How it works
Sulphur burns to sulphur oxides, so higher sulphur means more SO2 and particulate emissions and faster wear on catalysts. Cetane and cold-flow behave like other diesel grades. Because sulphur is moderate, natural lubricity is generally adequate without extra additive.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refiners export 50 ppm gasoil to importers whose standards sit between 500 ppm and 10 ppm, with storage and blending at Fujairah. Volumes are not stated.
Moléculas principais
Normas e especificações
| EN 590 (older editions) | European road diesel was limited to 50 mg/kg sulphur from 2005, before the 10 mg/kg limit from 2009 (Wikipedia). |
|---|---|
| ASTM D975 S15 and S500 | US grades with 15 ppm and 500 ppm maximum sulphur; there is no US 50 ppm grade. |
| Contract or national specification | Many importing countries set their own limits. |
Riscos
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Como é negociado
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts FOB Arab Gulf gasoil assessments; sulphur grade quoted separately from the 10 ppm price
Typical cargo
Typically 30,000 mt MR parcels or 5,000 to 10,000 mt coastal cargoes
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Pricing usually carries a differential to 10 ppm diesel because of the lower value of the higher-sulphur grade.
Refinarias que o produzem: nossas sugestões
152 refinarias listadas produzem este produto, 42 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcesso de exportação
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcesso de exportação
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingAcesso de exportação
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcesso de exportação
Terminais que o movimentam
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Você sabia
💡 50 ppm equals 0.005 percent by mass.
💡 The EU moved from 50 mg/kg to 10 mg/kg diesel sulphur from 2009 (Wikipedia).
Teste seus conhecimentos sobre Gasoil 50 ppm
What is the sulphur limit in Gasoil 50 ppm?
Mais neste grupo
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Fontes
Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.







