Middle distillates
Ultra Low Sulphur Diesel (ULSD)
ULSD is diesel with sulphur at or below 15 ppm in the United States and 10 ppm in Europe. The term is used for any modern road diesel with near-zero sulphur.
← Todos os produtosTambém chamado de: ULSD, ULSD 15 ppm, Ultra-low-sulfur diesel, Diesel S15
- Ponto de fulgorAbove 52 C (ASTM D975) or 55 C (EN 590)
- Densidade820 to 860 kg/m³
- Viscosidade1.9 to 4.1 mm2/s at 40 C (ASTM D975 No. 2); 2.0 to 4.5 (EN 590)
- EnxofreMax 15 ppm (US) or 10 ppm (EN 590)
- Faixa de ebulição170 to 370 °C
- PerigoUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)


Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0. Fotografia: feita a partir de uma fotografia de referência de DanTD, CC BY-SA 3.0, via Wikimedia Commons.
Ultra Low Sulphur Diesel (ULSD) é sólido à temperatura normal, por isso não há líquido para agitar. 1.9 to 4.1 mm2/s at 40 C (ASTM D975 No. 2); 2.0 to 4.5 (EN 590)
Aspecto esperado
Clear to pale yellow
Onde é usado
- Road transport diesel
- Off-road machinery in regulated markets
- Blending stock for renewable diesel
- Rail and generator fuel
Manuseamento e segurança
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Propriedades típicas
- Aparência
- Clear to pale yellow
- Densidade a 15 °C
- 820 to 860 kg/m³
- Faixa de ebulição
- 170 to 370 °C
- Ponto de fulgor
- Above 52 C (ASTM D975) or 55 C (EN 590)
- Viscosidade
- 1.9 to 4.1 mm2/s at 40 C (ASTM D975 No. 2); 2.0 to 4.5 (EN 590)
- Ponto de fluidez
- Varies by season and grade
- Enxofre típico
- Max 15 ppm (US) or 10 ppm (EN 590)
◉What it is
Ultra low sulphur diesel is the clean road diesel required in most developed markets. In the United States the ASTM D975 S15 grade limits sulphur to 15 ppm, while in Europe the equivalent is EN 590 at 10 ppm. The low sulphur level is needed for diesel particulate filters and selective catalytic reduction systems to function. In trade, ULSD usually means the 10 ppm export grade unless a specification says otherwise. Many buyers specify the exact standard, such as EN 590 or ASTM D975 S15, rather than rely on the label alone.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛A química
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Made by deep hydrodesulphurisation of straight-run and cracked gasoil in a hydrotreater at about 330 to 400 C and 40 to 80 bar hydrogen pressure. Lubricity additives are added afterwards because the severe treatment removes natural lubricants.
▶How it works
Low sulphur lets exhaust aftertreatment devices work without poisoning and cuts sulphur dioxide and particulate matter. Because treatment strips natural lubricity, standards such as ASTM D975 and EN 590 set a maximum wear scar from a high-frequency reciprocating rig (HFRR) test, and suppliers dose lubricity additive to pass it.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refineries export hydrotreated diesel that meets 10 ppm specifications, and Fujairah storage lets traders hold ULSD for onward sale to East Africa, South Asia and Europe. Individual refinery grades are not stated.
Moléculas principais




Normas e especificações
| ASTM D975 | US specification; S15 grade has 15 ppm maximum sulphur |
|---|---|
| EN 590 | European specification; 10 ppm maximum sulphur |
| ASTM D6751 | Biodiesel blend stock standard in the US |
Riscos
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Como é negociado
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts ULSD assessments (CIF Northwest Europe, FOB Arab Gulf 10 ppm gasoil); NYMEX ULSD futures in the US
Typical cargo
MR tanker cargoes of 30,000 to 37,000 mt; barge parcels of 2,000 to 5,000 mt
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Always confirm the exact specification in the contract, because ULSD can mean 10 ppm or 15 ppm.
Refinarias que o produzem: nossas sugestões
168 refinarias listadas produzem este produto, 56 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionAcesso de exportação
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingAcesso de exportação
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionAcesso de exportação
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingAcesso de exportação
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingAcesso de exportação
Terminais que o movimentam
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Você sabia
💡 US ULSD (15 ppm) became mandatory for highway use in 2006.
💡 Treating diesel to ultra-low sulphur strips natural lubricity, so suppliers add lubricity additive.
Teste seus conhecimentos sobre Ultra Low Sulphur Diesel (ULSD)
What is the US ASTM D975 S15 sulphur limit?
Mais neste grupo
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Fontes
Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.



