Ir para o conteúdo

Middle distillates

Marine Gasoil MGO (DMA)

MGO is a clear distillate marine fuel specified as DMA in ISO 8217. It is used in smaller engines, auxiliary engines and ships operating in emission control areas.

← Todos os produtosTambém chamado de: MGO, DMA, Marine gas oil, Marine diesel oil (loosely)

  • Ponto de fulgorMin 60 C (ISO 8217)
  • Densidade800 to 890 kg/m³
  • Viscosidade2.0 to 6.0 mm2/s at 40 C
  • Fluidez a frioWinter max 0 C; summer max 6 C (ISO 8217)
  • EnxofreMax 1.0% historically; typically below 0.10% for LSMGO
  • Faixa de ebulição170 to 380 °C
Cor típica, vidro de laboratório
Amostra de Marine Gasoil MGO (DMA) em vidro de laboratório, na cor típica
Uma amostra de Marine Gasoil MGO (DMA) em vidro de laboratório sobre fundo escuro de estúdio, para facilitar a avaliação da cor.
Fotografia de referência
Como Marine Gasoil MGO (DMA) é armazenado e movimentado na prática.

Créditos das imagens As amostras em vidro de laboratório foram feitas a partir de fotografias de referência da Wikimedia Commons por Chemik10 (CC BY-SA 2.5) e uma foto de amostra de petróleo em CC0. Fotografia: feita a partir de uma fotografia de referência de Грищук ЮН, CC BY-SA 3.0, via Wikimedia Commons.

Agite o líquido para sentir a sua espessura

Passe o rato ou um dedo sobre o líquido. Prima e arraste para agitar com mais força. Teclado: as setas agitam, a barra de espaço sacode.

Fino
A cor segue a cor típica de Marine Gasoil MGO (DMA).
Fino e soltoEspesso e pesado

Fino Leve e fluido. As ondas deslocam-se depressa e desvanecem-se devagar.

Viscosidade típica segundo os dados2.0 to 6.0 mm2/s at 40 C

Velocidade de agitação
0 px/s
Movimento do líquido
0%
Assentou após
-
Superfície
Parado

A classe é apenas uma referência de sensação. O valor de viscosidade apresentado é o dos dados da especificação.

Aspecto esperado

Clear and bright, pale yellow

Onde é usado

  • Auxiliary engines on all ships
  • Main engines of small vessels
  • Boilers and incinerators
  • ECA compliance fuel

Manuseamento e segurança

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

Propriedades típicas

Aparência
Clear and bright, pale yellow
Densidade a 15 °C
800 to 890 kg/m³
Faixa de ebulição
170 to 380 °C
Ponto de fulgor
Min 60 C (ISO 8217)
Viscosidade
2.0 to 6.0 mm2/s at 40 C
Ponto de fluidez
Winter max 0 C; summer max 6 C (ISO 8217)
Enxofre típico
Max 1.0% historically; typically below 0.10% for LSMGO

◉What it is

Marine gasoil is a distillate fuel supplied to ships under the ISO 8217 grade DMA. It has no residual oil, so it is cleaner and easier to handle than heavy fuel and does not need heating in most climates. Ships use it in auxiliary engines, in smaller main engines, for boiler lighting and when entering emission control areas. The standard limits sulphur through MARPOL, which is 0.50 percent in global waters and 0.10 percent in ECAs. DMA has a maximum viscosity of 6 mm2/s at 40 C and maximum density of 890 kg/m3 at 15 C.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛A química

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Distilled from crude in the CDU and hydrotreated; may be blended with cracked gasoil and kerosene components.

▶How it works

Burns in diesel engines without heating. Low viscosity requires cooling the fuel at the injectors to keep the viscosity above minimum for lubrication.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Fujairah is one of the world's largest bunkering hubs and supplies MGO to ships passing the Strait of Hormuz. No emission control area covers the Gulf (the ECAs are the Baltic Sea, North Sea, North America, the US Caribbean and the Mediterranean), but ships may buy MGO for ECA calls elsewhere. Current volumes are not stated.

Moléculas principais

Normas e especificações

ISO 8217Marine fuels standard; DMA grade: viscosity 2.0 to 6.0 mm2/s at 40 C, density 890 kg/m3 max, flash point 60 C min.
MARPOL Annex VI0.50% global and 0.10% ECA sulphur limits (IMO).
ISO 4259Precision of test methods and use of precision data.

Riscos

UN1202 (diesel fuel or gas oil)Classe Class 3 flammable liquid, packing group III (when shipped as dangerous goods)

SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.

Como é negociado

Units

Metric tonnes

Benchmarks

Platts MGO assessments at Fujairah, Singapore, Rotterdam and other ports; ICE Gasoil futures as reference

Typical cargo

Barge deliveries of 100 to 2,000 mt; bulk cargoes by MR tanker

Incoterms

FOB barge at the port or delivered ex-wharf; ships purchase on a DAP basis at anchorage.

Notes

Sold per mt with a BDN (bunker delivery note) and MARPOL sample.

Refinarias que o produzem: nossas sugestões

152 refinarias listadas produzem este produto, 42 delas no Golfo, no Irã e no Iraque. Ordenamos primeiro as unidades do Golfo, depois as em operação e, por fim, por capacidade.

Ver todos os 152 no mapa

Terminais que o movimentam

Você sabia

💡 MGO is the cleanest standard marine fuel and a distillate similar to No. 2 diesel.

💡 DMA is limited to 6.0 mm2/s at 40 C, while the residual grade RMG 380 is limited to 380 mm2/s at 50 C.

Teste seus conhecimentos sobre Marine Gasoil MGO (DMA)

Pergunta 1 de 3 · Pontuação 0 · Sequência 0

What is the max viscosity of DMA at 40 C?

Mais neste grupo

Fontes

Redigido com as palavras da própria PST a partir das fontes acima. Confiabilidade dos dados: medium. Os valores típicos variam conforme a origem e o contrato, por isso leia sempre a especificação do seu próprio contrato.