Middle distillates
Automotive Gasoil (AGO)
Automotive gasoil is the commercial name for diesel sold for road vehicles in many export markets. It is commonly traded in 10 ppm, 50 ppm and 500 ppm grades.
← All productsAlso called: AGO, Automotive diesel oil, ADO, High speed diesel (HSD)
- Flash pointAbove 55 C typical
- Density815 to 860 kg/m³
- Viscosity2.0 to 4.5 mm2/s at 40 C typical
- SulphurContract dependent: 10, 50, 500 ppm or higher
- Boiling range170 to 380 °C
- HazardUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by DanTD, CC BY-SA 3.0, via Wikimedia Commons.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Thin Light and free flowing. Waves travel quickly and fade slowly.
Typical viscosity from the data2.0 to 4.5 mm2/s at 40 C typical
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Clear to yellow
Where it is used
- Trucks, buses and cars
- Taxis and fleets
- Small power plants
- Fishing and coastal vessels
Handling and safety
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Typical properties
- Appearance
- Clear to yellow
- Density at 15 °C
- 815 to 860 kg/m³
- Boiling range
- 170 to 380 °C
- Flash point
- Above 55 C typical
- Viscosity
- 2.0 to 4.5 mm2/s at 40 C typical
- Pour point
- Varies
- Typical sulphur
- Contract dependent: 10, 50, 500 ppm or higher
◉What it is
AGO is a trade term, not a single standard. It describes road-use diesel as supplied in West Africa, East Africa and parts of Asia, usually with a stated sulphur level and the density and cetane needed for vehicles. In India and Pakistan similar fuel is called high speed diesel (HSD). The specification is set by the buyer's national rules. Contracts typically list sulphur, density, cetane index, flash point, distillation and water content.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛The chemistry
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Produced like other diesel by distillation and hydrotreating, blended to meet national specification.
▶How it works
Behaves as a normal automotive diesel: cetane for ignition, density for energy content, cold-flow for winter operation. Because specifications differ by country, the same cargo may be compliant in one market and off-spec in another.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refiners and Fujairah storage supply AGO to East Africa, Pakistan and the Red Sea region. Because buyer specifications differ, blending at Fujairah is a common service. Volumes are not stated.
Key molecules
Standards and specifications
| EN 590 or national specifications | The importing country's own standard, for example those of Nigeria, Ghana, Kenya or India, often modelled on EN 590. |
|---|---|
| ASTM D975 | US diesel specification, referenced for some Americas and Asian cargoes. |
Hazards
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
How it is traded
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts FOB Arab Gulf gasoil and Mediterranean gasoil assessments
Typical cargo
Typically 25,000 to 37,000 mt
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Always confirm sulphur and cetane with the contract and port authority.
Refineries that make it: our suggestions
152 listed refineries make this product, 42 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionExport access
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingExport access
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
Terminals that handle it
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Did you know
💡 In many West African markets AGO is the pump name for diesel.
💡 Sulphur limits for AGO differ widely between importing countries.
Test yourself on Automotive Gasoil (AGO)
What does AGO stand for?
More in this group
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.







