Middle distillates
LSMGO (0.1% Sulphur ECA Fuel)
LSMGO is marine gasoil with a maximum 0.10 percent sulphur. It is the compliant fuel for ships entering emission control areas without scrubbers.
← All productsAlso called: Low sulphur marine gasoil, ECA gasoil, 0.10% S MGO
- Flash pointMin 60 C
- Density800 to 890 kg/m³
- Viscosity2.0 to 6.0 mm2/s at 40 C
- Cold flowWinter max 0 C; summer max 6 C
- SulphurMax 0.10% m/m
- Boiling range170 to 380 °C


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by Грищук ЮН, CC BY-SA 3.0, via Wikimedia Commons.
LSMGO (0.1% Sulphur ECA Fuel) is a solid at normal temperature, so there is no liquid to stir. 2.0 to 6.0 mm2/s at 40 C
How it looks
Clear to pale yellow
Where it is used
- Ships inside ECAs
- Auxiliary engines
- Ships without scrubbers or with VLSFO that exceeds 0.10%
Handling and safety
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Flash point min 60 C.
Typical properties
- Appearance
- Clear to pale yellow
- Density at 15 °C
- 800 to 890 kg/m³
- Boiling range
- 170 to 380 °C
- Flash point
- Min 60 C
- Viscosity
- 2.0 to 6.0 mm2/s at 40 C
- Pour point
- Winter max 0 C; summer max 6 C
- Typical sulphur
- Max 0.10% m/m
◉What it is
LSMGO is a distillate marine fuel limited to 0.10 percent sulphur by mass. Since 2015 this has been the legal limit for ships in emission control areas (ECAs) such as the Baltic Sea, the North Sea, North American coastal areas and the US Caribbean. The Mediterranean Sea became an ECA for sulphur on 1 May 2025. LSMGO meets ISO 8217 DMA or DMZ and is typically produced from hydrotreated distillates. Ships switch from heavy fuel to LSMGO before entering an ECA, using changeover procedures to avoid thermal shock in fuel pumps.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛The chemistry
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Hydrotreated middle distillate and low sulphur gasoil, blended to meet DMA limits and 0.10% sulphur.
▶How it works
The low sulphur content lowers SOx emissions. The low viscosity requires fuel coolers on ships that switch from heavy fuel, to maintain proper viscosity at the injectors.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Fujairah supplies distillate marine fuels, and ships bound for ECAs (including the Mediterranean since 1 May 2025) buy compliant 0.10% fuel before sailing. No ECA covers the Gulf itself. Volumes are not stated.
Key molecules
Standards and specifications
| MARPOL Annex VI | 0.10% sulphur limit in ECAs since 1 January 2015 (IMO). |
|---|---|
| ISO 8217 | DMA and DMZ distillate grades. |
Hazards
Flash point min 60 C.
How it is traded
Units
Metric tonnes
Benchmarks
Platts LSMGO assessments; ICE Gasoil futures
Typical cargo
Barge deliveries; 100 to 2,000 mt
Incoterms
As MGO
Notes
Priced at a premium to VLSFO.
Refineries that make it: our suggestions
168 listed refineries make this product, 56 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionExport access
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingExport access
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
Terminals that handle it
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Did you know
💡 The ECA limit of 0.10 percent is one fifth of the 0.50 percent global cap.
💡 The Mediterranean SOx ECA took effect on 1 May 2025.
Test yourself on LSMGO (0.1% Sulphur ECA Fuel)
What is the ECA sulphur limit?
More in this group
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- Biodiesel Blends (FAME, B7 to B20)
Sources
- Bunker fuel (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Emission control area (Wikipedia)
- Fujairah (Wikipedia)
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.







