Skip to content

Middle distillates

Marine Diesel DMB

DMB is an ISO 8217 distillate marine fuel that may contain traces of residual oil. It has a higher allowed viscosity and density than DMA.

← All productsAlso called: DMB, Marine diesel oil (MDO), Marine diesel

  • Flash pointMin 60 C
  • Density800 to 900 kg/m³
  • ViscosityMax 11.0 mm2/s at 40 C
  • Cold flowWinter max 0 C; summer max 6 C (ISO 8217)
  • SulphurMax 0.50% globally under MARPOL; 0.10% in ECAs where used
  • Boiling range170 to 400 °C
Typical colour, laboratory glass
Laboratory glass sample of Marine Diesel DMB, in its typical colour
A sample of Marine Diesel DMB in laboratory glass on a dark studio background, so the colour is easy to judge.
Reference photograph
How Marine Diesel DMB is stored and moved in practice.

Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by Грищук ЮН, CC BY-SA 3.0, via Wikimedia Commons.

Stir the liquid to feel how thick it is

Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.

Thin
Colour follows the typical colour of Marine Diesel DMB.
Thin and looseThick and heavy

Thin Light and free flowing. Waves travel quickly and fade slowly.

Typical viscosity from the dataMax 11.0 mm2/s at 40 C

Stir speed
0 px/s
Liquid movement
0%
Settled after
-
Surface
Still

The class is a guide for feel. The viscosity figure shown is the one in the specification data.

How it looks

Dark to clear; may be hazy

Where it is used

  • Ships with older medium-speed engines
  • Auxiliary engines and boilers
  • Tugs and fishing vessels

Handling and safety

  • Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
  • Marine fuel flash point min 60 C.

Typical properties

Appearance
Dark to clear; may be hazy
Density at 15 °C
800 to 900 kg/m³
Boiling range
170 to 400 °C
Flash point
Min 60 C
Viscosity
Max 11.0 mm2/s at 40 C
Pour point
Winter max 0 C; summer max 6 C (ISO 8217)
Typical sulphur
Max 0.50% globally under MARPOL; 0.10% in ECAs where used

◉What it is

DMB is the second distillate grade in the ISO 8217 marine fuel standard. It is often called marine diesel oil (MDO). Unlike DMA, it is allowed to contain a small amount of residual material because it can be contaminated by residual oil in the supply chain. It is generally cloudy and slightly darker than DMA. It is mainly used by ships with older engines that tolerate a higher viscosity limit of 11 mm2/s at 40 C and by ships that do not need to burn the cleanest grade.

⬡What it is made of

Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.

⚛The chemistry

Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.

⚙How it is made

Distilled gasoil blended with small amounts of heavier gasoil or cutter streams.

▶How it works

Burns in diesel engines, sometimes requires slight heating in cold climates. Higher viscosity and density than DMA make it cheaper.

▣Storage, loading and inspection

Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.

★Why it matters in the Gulf

Distillate grades are available at Fujairah, but DMB-specific availability is not stated.

Key molecules

Standards and specifications

ISO 8217DMB limits: viscosity 11.0 mm2/s max at 40 C, density 900 kg/m3 max, flash point 60 C min.
MARPOL Annex VISulphur limits (0.50% global, 0.10% in ECAs).

Hazards

UN1202 (diesel fuel or gas oil)Class Class 3, packing group III (when shipped as dangerous goods)

Marine fuel flash point min 60 C.

How it is traded

Units

Metric tonnes

Benchmarks

Platts MGO-based assessments with a small discount to DMA

Typical cargo

Barge or tanker deliveries

Incoterms

As MGO

Notes

DMB trades less than DMA because the DMA grade has become the standard.

Refineries that make it: our suggestions

152 listed refineries make this product, 42 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.

See all 152 on the map

Terminals that handle it

Did you know

💡 DMB is sometimes simply called MDO.

💡 DMB is allowed a higher viscosity (11.0 mm2/s) than DMA (6.0 mm2/s).

Test yourself on Marine Diesel DMB

Question 1 of 3 · Score 0 · Streak 0

What is the max viscosity of DMB at 40 C?

More in this group

Sources

Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.