Middle distillates
Marine Gasoil MGO (DMA)
MGO is a clear distillate marine fuel specified as DMA in ISO 8217. It is used in smaller engines, auxiliary engines and ships operating in emission control areas.
← All productsAlso called: MGO, DMA, Marine gas oil, Marine diesel oil (loosely)
- Flash pointMin 60 C (ISO 8217)
- Density800 to 890 kg/m³
- Viscosity2.0 to 6.0 mm2/s at 40 C
- Cold flowWinter max 0 C; summer max 6 C (ISO 8217)
- SulphurMax 1.0% historically; typically below 0.10% for LSMGO
- Boiling range170 to 380 °C


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by Грищук ЮН, CC BY-SA 3.0, via Wikimedia Commons.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Thin Light and free flowing. Waves travel quickly and fade slowly.
Typical viscosity from the data2.0 to 6.0 mm2/s at 40 C
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Clear and bright, pale yellow
Where it is used
- Auxiliary engines on all ships
- Main engines of small vessels
- Boilers and incinerators
- ECA compliance fuel
Handling and safety
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.
Typical properties
- Appearance
- Clear and bright, pale yellow
- Density at 15 °C
- 800 to 890 kg/m³
- Boiling range
- 170 to 380 °C
- Flash point
- Min 60 C (ISO 8217)
- Viscosity
- 2.0 to 6.0 mm2/s at 40 C
- Pour point
- Winter max 0 C; summer max 6 C (ISO 8217)
- Typical sulphur
- Max 1.0% historically; typically below 0.10% for LSMGO
◉What it is
Marine gasoil is a distillate fuel supplied to ships under the ISO 8217 grade DMA. It has no residual oil, so it is cleaner and easier to handle than heavy fuel and does not need heating in most climates. Ships use it in auxiliary engines, in smaller main engines, for boiler lighting and when entering emission control areas. The standard limits sulphur through MARPOL, which is 0.50 percent in global waters and 0.10 percent in ECAs. DMA has a maximum viscosity of 6 mm2/s at 40 C and maximum density of 890 kg/m3 at 15 C.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛The chemistry
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Distilled from crude in the CDU and hydrotreated; may be blended with cracked gasoil and kerosene components.
▶How it works
Burns in diesel engines without heating. Low viscosity requires cooling the fuel at the injectors to keep the viscosity above minimum for lubrication.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Fujairah is one of the world's largest bunkering hubs and supplies MGO to ships passing the Strait of Hormuz. No emission control area covers the Gulf (the ECAs are the Baltic Sea, North Sea, North America, the US Caribbean and the Mediterranean), but ships may buy MGO for ECA calls elsewhere. Current volumes are not stated.
Key molecules
Standards and specifications
| ISO 8217 | Marine fuels standard; DMA grade: viscosity 2.0 to 6.0 mm2/s at 40 C, density 890 kg/m3 max, flash point 60 C min. |
|---|---|
| MARPOL Annex VI | 0.50% global and 0.10% ECA sulphur limits (IMO). |
| ISO 4259 | Precision of test methods and use of precision data. |
Hazards
SOLAS requires a flash point of at least 60 C for ship fuel, with a narrow exception for emergency equipment.
How it is traded
Units
Metric tonnes
Benchmarks
Platts MGO assessments at Fujairah, Singapore, Rotterdam and other ports; ICE Gasoil futures as reference
Typical cargo
Barge deliveries of 100 to 2,000 mt; bulk cargoes by MR tanker
Incoterms
FOB barge at the port or delivered ex-wharf; ships purchase on a DAP basis at anchorage.
Notes
Sold per mt with a BDN (bunker delivery note) and MARPOL sample.
Refineries that make it: our suggestions
152 listed refineries make this product, 42 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionExport access
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingExport access
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
Terminals that handle it
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Did you know
💡 MGO is the cleanest standard marine fuel and a distillate similar to No. 2 diesel.
💡 DMA is limited to 6.0 mm2/s at 40 C, while the residual grade RMG 380 is limited to 380 mm2/s at 50 C.
Test yourself on Marine Gasoil MGO (DMA)
What is the max viscosity of DMA at 40 C?
More in this group
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Sources
- Bunker fuel (Wikipedia)
- Fuel oil (Wikipedia)
- IMO: Sulphur oxides (SOx) and particulate matter, Regulation 14
- Emission control area (Wikipedia)
- Fujairah (Wikipedia)
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.







