Middle distillates
Heating Oil
Heating oil is a light distillate similar to diesel that is burned in boilers and furnaces. It is often dyed or marked for tax reasons.
← All productsAlso called: Home heating oil, Fuel oil No. 2, Gasoil for heating, Domestic heating oil
- Flash pointAbove 38 C (ASTM D396 No. 2 minimum 38 C); 55 C in many European specifications
- Density820 to 870 kg/m³
- Viscosity1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
- Cold flowTypically below -6 C for grade 2
- SulphurVaries from 10 ppm to 0.1% depending on market
- Boiling range170 to 390 °C


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by DanTD, CC BY-SA 3.0, via Wikimedia Commons.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Thin Light and free flowing. Waves travel quickly and fade slowly.
Typical viscosity from the data1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Pale yellow to red or blue when dyed
Where it is used
- Home and building heating
- Industrial boilers and dryers
- Backup generators
- Blending stock for diesel in some markets
Handling and safety
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Typical properties
- Appearance
- Pale yellow to red or blue when dyed
- Density at 15 °C
- 820 to 870 kg/m³
- Boiling range
- 170 to 390 °C
- Flash point
- Above 38 C (ASTM D396 No. 2 minimum 38 C); 55 C in many European specifications
- Viscosity
- 1.9 to 3.4 mm2/s at 40 C (ASTM D396 No. 2)
- Pour point
- Typically below -6 C for grade 2
- Typical sulphur
- Varies from 10 ppm to 0.1% depending on market
◉What it is
Heating oil is a low-viscosity fuel used for space heating in homes and commercial buildings. In North America it is called No. 2 fuel oil and is chemically almost identical to diesel, but it is taxed less and marked with dye or chemical tracers. In Europe it is often a gasoil with higher allowed sulphur or a lower cost specification. Heating oil burns in pressure-jet burners after atomisation. Because it is stored in outdoor or basement tanks, cold-flow quality and stability during long storage matter.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛The chemistry
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Taken from the middle distillate cut of the CDU and treated in hydrotreaters to the required sulphur level. Cheaper marker dyes and tracers are added where tax rules require.
▶How it works
Atomised oil mixes with air and burns, releasing about 38 MJ per litre. Sulphur determines the amount of SO2 in flue gas. Wax crystals can block filters in cold weather, so winter grades are blended with kerosene or additives.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Heating demand in the GCC is minimal. Heating oil specifications appear mainly in export trades and in storage at Fujairah. Central Asia, a priority region for PST, uses heating oil and similar grades seasonally.
Key molecules
Standards and specifications
| ASTM D396 | US standard for fuel oils, including No. 1 and No. 2 grades. |
|---|---|
| BS 2869 Class C2 | UK domestic heating oil (kerosene type). |
| National heating gasoil standards | European heating gasoil rules vary by country, for example DIN 51603-1 in Germany. |
Hazards
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
How it is traded
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage. In US trading, gallons and ULSD heating oil (NYMEX contract).
Benchmarks
NY Harbor heating oil and ULSD futures historically; Platts gasoil assessments in Europe and the Gulf
Typical cargo
Barge or tanker parcels from 2,000 to 30,000 mt
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Often traded together with diesel and taxed differently by country.
Refineries that make it: our suggestions
152 listed refineries make this product, 42 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionExport access
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingExport access
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
Terminals that handle it
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Did you know
💡 Heating oil is dyed in many countries so authorities can detect illegal use in road vehicles.
💡 No. 2 heating oil is chemically very similar to diesel but is taxed less.
Test yourself on Heating Oil
In the US, heating oil is usually called which grade?
More in this group
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.






