Middle distillates
Gasoil 500 ppm
Gasoil 500 ppm is a middle distillate with sulphur limited to 500 ppm (0.05% m/m). It is a common export diesel grade for markets whose vehicle standards do not yet require 10 ppm.
← All productsAlso called: Gasoil 0.05% S, Diesel 500 ppm, Low sulphur gasoil 0.05%
- Flash pointAbove 55 C typical (min 52 to 60 C depending on contract)
- Density820 to 860 kg/m³
- Viscosity2.0 to 4.5 mm2/s at 40 C typical
- SulphurMax 500 ppm (0.05% m/m)
- Boiling range170 to 375 °C
- HazardUN1202, Class 3 flammable liquid, packing group III (ADR/IMDG)


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by DanTD, CC BY-SA 3.0, via Wikimedia Commons.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Thin Light and free flowing. Waves travel quickly and fade slowly.
Typical viscosity from the data2.0 to 4.5 mm2/s at 40 C typical
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Clear and bright, pale yellow to light amber. A slight dark tint is normal at the top of the range. Haze means water, and a dark or brown fuel means contamination, oxidation or a heavy cut. Some markets dye diesel red for off-road or tax reasons.
Where it is used
- Road diesel in markets that still allow this sulphur level
- Power generation and industrial burners
- Mining and construction equipment
- Agricultural and fishing vessels
Handling and safety
- Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
- Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
Typical properties
- Appearance
- Clear to pale yellow, may be dyed by local rule
- Density at 15 °C
- 820 to 860 kg/m³
- Boiling range
- 170 to 375 °C
- Flash point
- Above 55 C typical (min 52 to 60 C depending on contract)
- Viscosity
- 2.0 to 4.5 mm2/s at 40 C typical
- Pour point
- Varies by season
- Typical sulphur
- Max 500 ppm (0.05% m/m)
◉What it is
Gasoil 500 ppm is a diesel-range fuel that has been hydrotreated to a moderate sulphur level. It is sold to countries and industries that use it for road transport, power generation and machinery. The sulphur level matches Euro 2 to Euro 3 era vehicle rules, so engines with advanced exhaust filters should not use it. It has the same basic boiling range and cetane behaviour as 10 ppm diesel but a higher sulphur content. Contracts often state the exact sulphur limit, density, cetane index, flash point and distillation requirements. Traditional export grade for markets without 10 ppm rules.
⬡What it is made of
Typically C10 to C22 (mostly C12 to C20) paraffins, naphthenes and aromatics; boiling roughly 170 to 390 C.
⚛The chemistry
Diesel is mostly straight and branched alkanes such as hexadecane (C16H34, the cetane reference), plus cycloalkanes and alkylbenzenes. Long straight alkanes ignite easily under compression, which gives a high cetane number, but they also form wax crystals in cold weather. Aromatics and cycloalkanes ignite less readily and lower the cetane number but improve cold flow and density.
⚙How it is made
Atmospheric distillation provides straight-run gasoil which is hydrotreated at less severity than 10 ppm production. Blending with other treated cuts adjusts density and cold flow.
▶How it works
Sulphur burns to sulphur oxides, so higher sulphur means more SO2 and particulate emissions and faster wear on catalysts. Cetane and cold-flow behave like other diesel grades. Because sulphur is moderate, natural lubricity is generally adequate without extra additive.
▣Storage, loading and inspection
Store in clean, water-free tanks with water drains and fuel-compatible coatings; keep away from copper and zinc surfaces that harm stability. Watch water and microbial growth at the tank bottom and sample from top, middle and bottom with an automatic or manual sampler under ASTM D4057 or ISO 3170. Independent inspectors normally check quantity, density, sulphur, flash point and appearance at loading and discharge. Cold-climate cargoes may need cold-flow additives.
★Why it matters in the Gulf
Gulf refiners have long exported gasoil of 500 ppm sulphur or higher to East Africa, South Asia and the Red Sea region, with storage and blending at Fujairah. Many importers are tightening limits, so this grade is likely shrinking. Volumes are not stated.
Key molecules




Standards and specifications
| EN 590 (older editions) | Earlier European diesel sulphur limits were 350 mg/kg until the end of 2004, then 50 mg/kg, then 10 mg/kg from 2009. A 500 ppm level belongs to older vehicle-standard generations. |
|---|---|
| ASTM D975 S500 | US diesel grade with 500 ppm maximum sulphur. |
| Contract or national specification | Many importing countries set their own limits. |
Hazards
Combustible rather than highly flammable (flash point above 55 C for most specifications). Harmful to aquatic life. Vapours can form explosive mixtures when heated or misted.
How it is traded
Units
Metric tonnes, with barrels (about 7.5 bbl per tonne at typical density) and cubic metres used for pricing and storage.
Benchmarks
Platts FOB Arab Gulf gasoil assessments; sulphur grade quoted separately from the 10 ppm price
Typical cargo
Typically 30,000 mt MR parcels or 5,000 to 10,000 mt coastal cargoes
Incoterms
FOB (Arab Gulf load port), CFR or CIF (destination), DAP for inland deliveries; FCA for road or rail.
Notes
Pricing usually carries a differential to 10 ppm diesel because of the lower value of the higher-sulphur grade.
Refineries that make it: our suggestions
152 listed refineries make this product, 42 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionExport access
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingExport access
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
Terminals that handle it
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Did you know
💡 500 ppm equals 0.05 percent by mass.
💡 Many importing countries have been moving to 50 ppm or 10 ppm limits.
Test yourself on Gasoil 500 ppm
What is the sulphur limit in Gasoil 500 ppm?
See the PST specification page
More in this group
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
- Biodiesel Blends (FAME, B7 to B20)
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.



