Middle distillates
Biodiesel Blends (FAME, B7 to B20)
Biodiesel is a diesel substitute made from fats and oils reacted with methanol to give fatty acid methyl esters (FAME). It is blended with petroleum diesel at levels such as B7 or B20.
← All productsAlso called: FAME, B7, B20, Fatty acid methyl ester
- Flash pointAbove 101 C for pure FAME (EN 14214)
- Density860 to 900 kg/m³
- Viscosity3.5 to 5.0 mm2/s at 40 C (EN 14214)
- Cold flowVaries widely with feedstock; cloud point can be above 0 C
- SulphurMax 10 mg/kg
- Boiling range330 to 360 °C


Image credits Laboratory glass samples are made from reference photos on Wikimedia Commons by Chemik10 (CC BY-SA 2.5) and a CC0 petroleum sample photo. Photograph: made from a reference photo by DanTD, CC BY-SA 3.0, via Wikimedia Commons.
Stir the liquid to feel how thick it is
Move the mouse or a finger across the liquid. Press and drag to stir harder. Keyboard: arrow keys stir, Space shakes.
Thin Light and free flowing. Waves travel quickly and fade slowly.
Typical viscosity from the data3.5 to 5.0 mm2/s at 40 C (EN 14214)
- Stir speed
- 0 px/s
- Liquid movement
- 0%
- Settled after
- -
- Surface
- Still
The class is a guide for feel. The viscosity figure shown is the one in the specification data.
How it looks
Clear amber to yellow
Where it is used
- Blend component in road diesel
- Fleet fuel (B20)
- Marine biofuel blends
- Off-grid power generation
Handling and safety
- Keep tanks dry and clean; use within 6 months where possible; add antioxidant if needed. Heat tanks in cold climates to avoid gelling. Sample and test for oxidation stability and water.
- B100 is combustible and biodegradable and can degrade some seals and filters.
Typical properties
- Appearance
- Clear amber to yellow
- Density at 15 °C
- 860 to 900 kg/m³
- Boiling range
- 330 to 360 °C
- Flash point
- Above 101 C for pure FAME (EN 14214)
- Viscosity
- 3.5 to 5.0 mm2/s at 40 C (EN 14214)
- Pour point
- Varies widely with feedstock; cloud point can be above 0 C
- Typical sulphur
- Max 10 mg/kg
◉What it is
Biodiesel is a renewable fuel produced by reacting vegetable oils, used cooking oil or animal fats with methanol. The product is a mixture of fatty acid methyl esters called FAME. Blends are named by percentage, for example B7 contains 7 percent biodiesel and 93 percent petroleum diesel. EN 590 allows up to 7 percent FAME. Higher blends such as B20 are used in fleets and some countries. FAME has slightly lower energy content than diesel and can have poorer cold flow and storage stability.
⬡What it is made of
Fatty acid methyl esters, typically C16 to C18 chains, with some saturated and unsaturated esters.
⚛The chemistry
A FAME molecule is R-COO-CH3, where R is a long hydrocarbon chain derived from a fatty acid. The oxygen in the ester group means FAME has lower energy per kilogram but burns cleanly and has good lubricity. Saturated chains (such as palmitate) give high cetane but poor cold flow; unsaturated chains (such as oleate) improve cold flow but oxidise more easily.
⚙How it is made
Transesterification: vegetable oil or fat reacts with methanol in the presence of a catalyst (such as sodium methoxide) to give FAME and glycerol. About 100 kg of glycerol is produced per tonne of biodiesel (Wikipedia). The FAME is washed and dried, then blended at terminals.
▶How it works
FAME has cetane similar to or higher than diesel and good lubricity. It can attract water, grow microbes and oxidise during storage. Blends up to B20 are usually fine in standard diesel engines, though some manufacturers limit allowed blend levels.
▣Storage, loading and inspection
Keep tanks dry and clean; use within 6 months where possible; add antioxidant if needed. Heat tanks in cold climates to avoid gelling. Sample and test for oxidation stability and water.
★Why it matters in the Gulf
Regional FAME use is small compared with Europe, and trading hubs may handle biofuel blends. UAE biodiesel production details are not stated.
Key molecules
Standards and specifications
| EN 14214 | European FAME biodiesel quality standard |
|---|---|
| ASTM D6751 | US B100 standard |
| ASTM D7467 | US B6 to B20 blend standard |
| EN 590 | Allows up to 7% v/v FAME in diesel |
Hazards
B100 is combustible and biodegradable and can degrade some seals and filters.
How it is traded
Units
Metric tonnes and cubic metres
Benchmarks
Platts and Argus FAME assessments (for example FAME 0 and RME)
Typical cargo
Parcels of 1,000 to 30,000 mt
Incoterms
FOB, CIF, DAP
Notes
Prices follow vegetable oil, used cooking oil and tax or mandate rules.
Refineries that make it: our suggestions
152 listed refineries make this product, 42 of them in the Gulf, Iran and Iraq. We rank Gulf plants first, then operating plants, then by capacity.
- 1Ruwais Refinery
United Arab Emirates · 922,000 bpdLargest capacity among Gulf-first matchesGulf locationOperatingDeep conversionExport access
- 2Al-Zour Refinery
Kuwait · 615,000 bpdGulf locationOperatingExport access
- 3Ras Tanura Refinery
Saudi Arabia · 550,000 bpdGulf locationOperatingDeep conversionExport access
- 4SATORP Jubail Refinery
Saudi Arabia · 465,000 bpdGulf locationOperatingDeep conversionExport access
- 5Mina Abdullah Refinery
Kuwait · 454,000 bpdGulf locationOperatingExport access
- 6SAMREF Yanbu Refinery
Saudi Arabia · 400,000 bpdGulf locationOperatingExport access
Terminals that handle it
- Port of Fujairah (anchorage and bunkering)
United Arab Emirates
- Ras Tanura terminal
Saudi Arabia
- Vopak Horizon Fujairah
United Arab Emirates
- Bapco Sitra tank farm and marine terminal
Bahrain
- Yanbu oil terminals (Red Sea)
Saudi Arabia
- VTTI Fujairah
United Arab Emirates
Did you know
💡 About 100 kg of glycerol is produced per tonne of biodiesel (Wikipedia).
💡 Rudolf Diesel's engine ran on peanut oil at the 1900 Paris Exposition (Wikipedia).
Test yourself on Biodiesel Blends (FAME, B7 to B20)
What is B7?
More in this group
- Jet A-1
- Kerosene (illuminating)
- Diesel EN 590 (10 ppm)
- Ultra Low Sulphur Diesel (ULSD)
- Gasoil 500 ppm
- Gasoil 50 ppm
- Heating Oil
- Automotive Gasoil (AGO)
- Red Diesel (Marked Diesel)
- Marine Gasoil MGO (DMA)
- Marine Diesel DMB
- LSMGO (0.1% Sulphur ECA Fuel)
Sources
Written in PST's own words from the sources above. Confidence in the data: medium. Typical values vary by origin and contract, so always read the specification in your own contract.







